

The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
Glued can sleeve with chime locks dieline
Glued sleeve round a row of three cans, open at both ends, with chime locks at the top and bottom corners and two finger holes in the top. A ready-sized preset of the can wrap-around multipack — change the length, width and height and every panel, tuck and glue flap is redrawn to match.

Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- ECMA E10.20.00.00
- Structure
- Can wrap-around multipack
- Inside size
- Length (A) 198 · Width (B) 66 · Height 122 mm
- Size range
- Length (A) 60–600 · Width (B) 50–300 · Height 40–300 mm
- Manufacturing
- 198 × 66.5 × 122.5 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.081 m²
- Default board
- Kraft board 350 g · 0.46 mm caliper
- Board options
- Kraft 350SBS 350GD2 350FBB 400SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm

On a production sheet
Exact engine layout at the stated default dimensions: 198 × 66 × 122 mm. Stock 1020 × 720 mm, grain along width; 12 mm gripper, 10 mm tail, 6 mm sides, 5 mm gutter and 3 mm bleed. Grain rotation, automatic layout. Each part is nested separately.
Proven optimal: no layout fits more than 4 ups on this sheet.
How it folds
The glued can sleeve with chime locks erects in 3 steps, in the order the creases are scored to take. The editor plays the same sequence in 3D and lights each step’s creases on the dieline.
- 1Fold the walls upSide and 1 more
- 2Fold the glue flap and glue the seamGlue lap
- 3Fold the baseBottom
How the blank is sized
Score-to-score panel sizes of this ECMA E10.20.00.00 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.46 mm for Kraft board 350 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Glue lap | 33 × 198 | – × L |
| Side ×2 | 122.5 × 198 | H + T × L |
| Top | 73.5 × 198 | – × L |
| Bottom | 66 × 198 | W × L |
Adjustable in the editor
Beyond the size and board, this structure exposes 9 options; the template and 3D preview follow each change.
- Construction8 options
- Cans per rowcount
- Heel locks4 options
- Heel lock lengthmm
- Heel lock depthmm
- Heel lock reliefmm
- Bottom bevelmm
- Top bevelmm
- Finger holes4 options
The can wrap-around multipack family
The same structure with sizes, boards and options set for a use.

Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Before you choose this template
Size, materials, downloads and production checks.
Will the glued can sleeve with chime locks dieline fit my product?
Glued sleeve round a row of three cans, open at both ends, with chime locks at the top and bottom corners and two finger holes in the top. The default dimensions in inside-size mode are Length (A) 198 mm, Width (B) 66 mm, Height 122 mm. Measure your product and any inserts or wrapping, then set the template size. Check a physical sample with your contents before ordering production.
Can I change the size and design?
Yes. The supported ranges are Length (A) 60–600 mm, Width (B) 50–300 mm, Height 40–300 mm. At the default settings, the editor also exposes Construction, Cans per row, Heel locks, Heel lock length, Heel lock depth, Heel lock relief and 3 more options. Add your own artwork and preview the result in 3D. The template geometry is rebuilt when its dimensions change.
Which materials can I choose?
The default is Kraft board 350 g (0.46 mm caliper). This structure allows Kraft board 350 g, SBS white board 350 g, Grey-back duplex 350 g, Folding boxboard 400 g, SBS white board 18 pt. Select the stock before checking fit, and ask your converter to confirm the grade and caliper for the intended product.
Which files can I download?
The template page offers dimensioned PDF, Illustrator (.ai via script), layered SVG and DXF cutting and crease geometry. After adding artwork in the editor, you can export a print-ready PDF and review the bleed, safe areas and dieline layers with your printer.
Is this dieline free?
Browsing the previews is free, and you can customize the template after signing in with Google. Template and print-file downloads require a Pro or Business plan. The Free plan allows one eligible download every 8 hours; free mockups, renders and videos carry a watermark. See the pricing page for the current plans.
Can I send the download straight to production?
Use the file as a starting point for a printer or converter review. Confirm the finished dimensions, stock, crease and cutting setup, assembly, bleed and artwork, then approve a physical sample. The 3D preview does not test strength, transit performance or suitability for particular contents.
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this glued can sleeve with chime locks yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.





