Preset
Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
Parametric structureFood
Fried chicken box dieline
The fried chicken takeaway box: a low tuck-top carton with steam vents in both ends to keep the coating crisp, on a pre-glued auto-lock bottom that pops square in one move. A parametric template — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside229 × 127 × 76 mm
Outside229.9 × 127.9 × 76.9 mm
Flat blank725.4 × 295.4 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- —
- Inside size
- Length 229 · Width 127 · Height 76 mm
- Size range
- Length 100–350 · Width 60–250 · Height 40–150 mm
- Manufacturing
- 229.4 × 127.5 × 76.5 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.149 m² · about 2 up on a 720 × 1020 mm sheet
- Default board
- Food SBS, PE-coated 300 g · 0.45 mm caliper
- Board options
- Food SBS PEFood kraft PESBS 350Kraft 350E-flute WE-flute KSBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Reverse crease
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.45 mm for Food SBS, PE-coated 300 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Front | 229.5 × 76.5 | L + T × H + T |
| Left side | 127.4 × 76.5 | W + T × H + T |
| Back | 229.4 × 76.5 | L + T × H + T |
| Right side | 127 × 76.5 | W × H + T |
| Glue flap | 12 × 76.5 | – × H + T |
| Top closure | 229.4 × 126.5 | L + T × W − T |
| Top tuck | 228.6 × 15 | L − T × – |
| Top dust flap | 127.4 × 71 | W + T × – |
| Top dust flap | 127 × 71 | W × – |
| Crash-lock flap (back) | 229.4 × 77.4 | L + T × – |
| Glued web | 44.6 × 90.1 | – |
| Bottom side flap | 127.4 × 63.5 | W + T × – |
| Crash-lock flap (front) | 229.5 × 77.4 | L + T × – |
| Glued web | 90.1 × 44.6 | – |
| Bottom side flap | 127 × 63.5 | W × – |
Adjustable in the editor
Beyond the size and board, this structure exposes 7 options; the template and 3D preview follow each change.
- Vents per endcount
- Vent diametermm
- Bottom2 options
- Tuck depthmm
- Slit lockon / off
- Thumb notchon / off
- Notch radiusmm
Ready-sized fried chicken box presets
The same structure with sizes, boards and options set for a use.
- Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this fried chicken box yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.