Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
Parametric structureBags & pouches
Zipper flat-bottom coffee pouch 500 g dieline
Flat-bottom bag with side gussets, optional resealable zipper and degassing valve. Zipper versions add a body seam overlap and base seal guides; confirm forming allowances with your converter. Fill weights are editable starting examples. A ready-sized preset of the flat-bottom bag — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside120 × 260 mm
Outside120 × 260 mm
Flat blank398 × 260 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- —
- Inside size
- Front width 120 · Height 260 mm
- Size range
- Front width 50–300 · Height 100–500 mm
- Manufacturing
- 120 × 260 mm score to score · inside vs outside sizes
- Parts
- 2 parts — Bag film, Bag base
- Board area
- 0.112 m² · about 4 up on a 720 × 1020 mm sheet
- Default board
- Metallised PET / PE laminate · 0.09 mm caliper
- Board options
- Kraft 350Label glossPaper 170Clear BOPPWhite PET/PEClear PET/PEMet PET/PEKraft/PE
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.09 mm for Metallised PET / PE laminate). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Left gussetBag film | 75 × 260 | – × H |
| FrontBag film | 120 × 260 | L × H |
| Right gussetBag film | 75 × 260 | – × H |
| BackBag film | 120 × 260 | L × H |
| Body seam overlapBag film | 8 × 260 | – × H |
| BaseBag base | 120 × 75 | L × – |
Adjustable in the editor
Beyond the size and board, this structure exposes 10 options; the template and 3D preview follow each change.
- Side gussetmm
- Top sealmm
- Degassing valveon / off
- Fill%
- Metallised filmon / off
- Carry header3 options
- Mouth2 options
- Resealable zipperon / off
- Zipper from topmm
- Body seam overlapmm
The flat-bottom bag family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this zipper flat-bottom coffee pouch 500 g yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.