Skip to content
DielineMaker
Start designing free
Diagonal-lid gift cube
Preview image

The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.

DM-DIAGONAL-LID-01Tuck end

Diagonal-lid gift cube dieline

A cube or square box whose lid is two triangles meeting on the diagonal: each half hinges on an opposite wall and tucks into a side wall, so the box opens across its corner. Straight-tuck base, optional finger notch. A ready-sized preset of the diagonal-lid box — change the length, width and height and every panel, tuck and glue flap is redrawn to match.

Inside75 × 75 × 75 mm
Outside76 × 76 × 76 mm
Flat blank314 × 237.6 mm
Download the dielinePro
Flat dieline preview

Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans

Reference
DM-DIAGONAL-LID-01
Structure
Diagonal-lid box
Inside size
Width 75 · Depth 75 · Height 75 mm
Size range
Width 40–250 · Depth 40–250 · Height 30–250 mm
Manufacturing
75.5 × 75.5 × 75.5 mm score to score · inside vs outside sizes
Parts
One blank
Board area
0.041 m²
Default board
SBS white board 350 g · 0.5 mm caliper
Board options
SBS 350FBB 400Kraft 350Black 350SBS 300SBS 18 pt
Good for
cubegiftcandlesoapdiagonal lid boxdiagonal opening boxdiagonal lid gift boxdiagonal box templatesplit lid boxtriangle lid box

The flat dieline

Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.

  • Crease
  • Cut
  • Glue area
  • Bleed 3 mm
Diagonal-lid gift cube flat dieline with cut and crease lines

On a production sheet

Exact engine layout at the stated default dimensions: 75 × 75 × 75 mm. Stock 1020 × 720 mm, grain along width; 12 mm gripper, 10 mm tail, 6 mm sides, 5 mm gutter and 3 mm bleed. Grain rotation, automatic layout. Each part is nested separately.

8 per sheet · Diagonal-lid box
8 copies of Diagonal-lid box on the stock sheet

Not proven optimal: upper bound 16 ups, within 8 ups (50.0 %).

Open in editor with this sheet

How it folds

The diagonal-lid gift cube erects in 5 steps, in the order the creases are scored to take. The editor plays the same sequence in 3D and lights each step’s creases on the dieline.

  1. 1
    Fold the walls upLeft wall, Front wall, Right wall, Glue flap
  2. 2
    Fold the dust flaps inBase dust flap and 1 more
  3. 3
    Fold the baseBase, Base tuck
  4. 4
    Close the lidLid half, Lid tuck
  5. 5
    Close the lidLid half, Lid tuck
BackLeft · 1Top · 4Front · 1Lid tuck · 4Right · 1Bottom · 3Top · 5Lid tuck · 5
Each panel at its place on the blank, numbered by the step that folds it. Grey panels stay flat: the base, or the face the rest folds around.

Adjustable in the editor

Beyond the size and board, this structure exposes 3 options; the template and 3D preview follow each change.

  • Finger notchon / off
  • Base tuck depthmm
  • Dust flap depthmm

The diagonal-lid box family

The same structure with sizes, boards and options set for a use.

Before you choose this template

Size, materials, downloads and production checks.

Will the diagonal-lid gift cube dieline fit my product?

A cube or square box whose lid is two triangles meeting on the diagonal: each half hinges on an opposite wall and tucks into a side wall, so the box opens across its corner. Straight-tuck base, optional finger notch. The default dimensions in inside-size mode are Width 75 mm, Depth 75 mm, Height 75 mm. Measure your product and any inserts or wrapping, then set the template size. Check a physical sample with your contents before ordering production.

Can I change the size and design?

Yes. The supported ranges are Width 40–250 mm, Depth 40–250 mm, Height 30–250 mm. At the default settings, the editor also exposes Finger notch, Base tuck depth, Dust flap depth. Add your own artwork and preview the result in 3D. The template geometry is rebuilt when its dimensions change.

Which materials can I choose?

The default is SBS white board 350 g (0.5 mm caliper). This structure allows SBS white board 350 g, Folding boxboard 400 g, Kraft board 350 g, Black-core board 350 g, SBS white board 300 g, SBS white board 18 pt. Select the stock before checking fit, and ask your converter to confirm the grade and caliper for the intended product.

Which files can I download?

The template page offers dimensioned PDF, Illustrator (.ai via script), layered SVG and DXF cutting and crease geometry. After adding artwork in the editor, you can export a print-ready PDF and review the bleed, safe areas and dieline layers with your printer.

Is this dieline free?

Browsing the previews is free, and you can customize the template after signing in with Google. Template and print-file downloads require a Pro or Business plan. The Free plan allows one eligible download every 8 hours; free mockups, renders and videos carry a watermark. See the pricing page for the current plans.

Can I send the download straight to production?

Use the file as a starting point for a printer or converter review. Confirm the finished dimensions, stock, crease and cutting setup, assembly, bleed and artwork, then approve a physical sample. The 3D preview does not test strength, transit performance or suitability for particular contents.

Compare plans and downloads

Similar structures

Other structures built in a similar way, matched on code family, category, closures and proportions.

All tuck end templates

Make this diagonal-lid gift cube yours

Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.