Skip to content
DielineMaker
Start designing free
Money box
Preview image

The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.

DM-MONEY-BOX-01Tuck end

Money box dieline

A tuck-end carton with a coin or note slot through the top lid. Empty it through the base tuck, or glue both ends and break out the perforated disc in the base. A parametric template — change the length, width and height and every panel, tuck and glue flap is redrawn to match.

Inside85 × 85 × 110 mm
Outside86 × 86 × 111 mm
Flat blank353.5 × 309.5 mm
Download the dielinePro
Flat dieline preview

Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans

Reference
DM-MONEY-BOX-01
Inside size
Width 85 · Depth 85 · Height 110 mm
Size range
Width 50–250 · Depth 40–200 · Height 50–300 mm
Manufacturing
85.5 × 85.5 × 110.5 mm score to score · inside vs outside sizes
Parts
One blank
Board area
0.068 m²
Default board
SBS white board 350 g · 0.5 mm caliper
Board options
SBS 350SBS 300FBB 400GD2 350Kraft 350Black 350F-fluteE-flute WPET 0.3SBS 18 pt
Good for
money boxmoney box templatecoin bankcoin boxpiggy bank boxsavings boxdonation boxcharity boxcollection boxtip box

The flat dieline

Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.

  • Crease
  • Cut
  • Glue area
  • Bleed 3 mm
Money box flat dieline with cut and crease lines

On a production sheet

Exact engine layout at the stated default dimensions: 85 × 85 × 110 mm. Stock 1020 × 720 mm, grain along width; 12 mm gripper, 10 mm tail, 6 mm sides, 5 mm gutter and 3 mm bleed. Grain rotation, automatic layout. Each part is nested separately.

5 per sheet · Money box
5 copies of Money box on the stock sheet

Not proven optimal: upper bound 9 ups, within 4 ups (44.4 %).

Open in editor with this sheet

How it folds

The money box erects in 4 steps, in the order the creases are scored to take. The editor plays the same sequence in 3D and lights each step’s creases on the dieline.

  1. 1
    Fold the walls upLeft side, Back, Right side, Glue flap
  2. 2
    Fold the dust flaps inTop dust flap, Bottom dust flap and 2 more
  3. 3
    Tuck the flaps inTop tuck, Bottom tuck
  4. 4
    Close the end flapsTop closure, Bottom closure
FrontLeft · 1Back · 1Right · 1Top · 4Bottom · 4
Each panel at its place on the blank, numbered by the step that folds it. Grey panels stay flat: the base, or the face the rest folds around.

How the blank is sized

Score-to-score panel sizes of this DM-MONEY-BOX-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.5 mm for SBS white board 350 g). Change the size or board in the editor and every panel is recalculated.

PanelSize (mm)Formula
Front85.5 × 110.5– × H + T
Left side85.5 × 110.5– × H + T
Back85.5 × 110.5– × H + T
Right side85 × 110.5– × H + T
Glue flap12 × 110.5– × H + T
Top closure85.5 × 84.5–
Top tuck84.5 × 15–
Top dust flap85.5 × 41.8–
Top dust flap85 × 41.8–
Bottom closure85.5 × 84.5–
Bottom tuck84.5 × 15–
Bottom dust flap85.5 × 41.8–
Bottom dust flap85 × 41.8–

Adjustable in the editor

Beyond the size and board, this structure exposes 15 options; the template and 3D preview follow each change.

  • Tuck depthmm
  • Slit lockon / off
  • Thumb notchon / off
  • Notch radiusmm
  • Dust flap profile2 options
  • Top tuck depthmm
  • Top dust flap depthmm
  • Bottom tuck depthmm
  • Bottom dust flap depthmm
  • Tuck corner radiusmm
  • Dust flap taper°
  • Dust flap tip bevelmm
  • Slot lengthmm
  • Slot widthmm
  • Emptying2 options

Ready-sized money box presets

The same structure with sizes, boards and options set for a use.

Inspired by real signage and retail projects

See where an idea can go.

Original concepts inspired by real signage and retail projects, with fictional brands and native templates you can open and customize.

Generated ZESTIVELL orange and pink tuck-end competition carton with a top entry slot, blank A6 cards and a cobalt pen on a juice-bar counter.
AI-generated creative concept · ZESTIVELL
ZESTIVELL

Give a juice break a little anticipation.

The job

  • Make a counter entry box for a juice-bar competition, with cards and a pen beside it.

Choose your starting point

The competition preset uses 200 × 200 × 250 mm inside dimensions, FBB 400 board, tuck ends and a 120 × 5 mm slot through the top lid. Insert A6 cards short edge first: their 105 mm width fits the slot. Confirm card thickness, entry capacity, closure and approved competition instructions on a physical sample. This is a folding carton, not a secure ballot box; the loose cards and pen are separate items.

Explore the actual templates

Native geometry in sample colours below. Open a template to edit its sample artwork. The generated scene is creative direction; its artwork and construction may differ.

A6 entry carton · 200 × 200 × 250 mm
Customize this template

Before you choose this template

Size, materials, downloads and production checks.

Will the money box dieline fit my product?

A tuck-end carton with a coin or note slot through the top lid. Empty it through the base tuck, or glue both ends and break out the perforated disc in the base. The default dimensions in inside-size mode are Width 85 mm, Depth 85 mm, Height 110 mm. Measure your product and any inserts or wrapping, then set the template size. Check a physical sample with your contents before ordering production.

Can I change the size and design?

Yes. The supported ranges are Width 50–250 mm, Depth 40–200 mm, Height 50–300 mm. At the default settings, the editor also exposes Tuck depth, Slit lock, Thumb notch, Notch radius, Dust flap profile, Top tuck depth and 9 more options. Add your own artwork and preview the result in 3D. The template geometry is rebuilt when its dimensions change.

Which materials can I choose?

The default is SBS white board 350 g (0.5 mm caliper). This structure allows SBS white board 350 g, SBS white board 300 g, Folding boxboard 400 g, Grey-back duplex 350 g, Kraft board 350 g, Black-core board 350 g, F-flute micro corrugated, E-flute white / kraft, Clear PET 0.3 mm, SBS white board 18 pt. Select the stock before checking fit, and ask your converter to confirm the grade and caliper for the intended product.

Which files can I download?

The template page offers dimensioned PDF, Illustrator (.ai via script), layered SVG and DXF cutting and crease geometry. After adding artwork in the editor, you can export a print-ready PDF and review the bleed, safe areas and dieline layers with your printer.

Is this dieline free?

Browsing the previews is free, and you can customize the template after signing in with Google. Template and print-file downloads require a Pro or Business plan. The Free plan allows one eligible download every 8 hours; free mockups, renders and videos carry a watermark. See the pricing page for the current plans.

Can I send the download straight to production?

Use the file as a starting point for a printer or converter review. Confirm the finished dimensions, stock, crease and cutting setup, assembly, bleed and artwork, then approve a physical sample. The 3D preview does not test strength, transit performance or suitability for particular contents.

Compare plans and downloads

Similar structures

Other structures built in a similar way, matched on code family, category, closures and proportions.

All tuck end templates

Make this money box yours

Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.