Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
Parametric structureShapes
5-point hollow paper star dieline
A hollow star made from one four-face sheet per point. Raised front and back centres form the dimensional ridges; the separate spikes close on their own seams and bond together around the inner valleys. A ready-sized preset of the hollow dimensional star — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
InsideØ 180 × 35 mm
OutsideØ 180 × 35 mm
Flat blank90.5 × 99.2 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- —
- Inside size
- Outer point diameter 180 · Front-to-back depth 35 mm
- Size range
- Outer point diameter 40–600 · Front-to-back depth 5–200 mm
- Manufacturing
- Ø 180 × 35 mm score to score · inside vs outside sizes
- Parts
- 5 parts — Star point 1 · join to 5, Star point 2 · join to 1, Star point 3 · join to 2, Star point 4 · join to 3, Star point 5 · join to 4
- Board area
- 0.027 m² · about 84 up on a 720 × 1020 mm sheet
- Default board
- Art paper 170 g · 0.16 mm caliper
- Board options
- Paper 170SBS 300Kraft 350SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Reverse crease
- Crease
- Cut
- Glue area
- Bleed 3 mm
Adjustable in the editor
Beyond the size and board, this structure exposes 4 options; the template and 3D preview follow each change.
- Star pointscount
- Inner valley diametermm
- Odd-point joining tabsmm
- Even-point joining tabsmm
The hollow dimensional star family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this 5-point hollow paper star yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.