Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
Parametric structureDisplay
Landscape double-wing back support dieline
A wider mounting spine for a separate A4 landscape sign. A ready-sized preset of the double-wing folding back support — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside170 × 90 × 170 mm
Outside170 × 90 × 170 mm
Flat blank350 × 170 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- —
- Inside size
- Mounting width 170 · Stand depth 90 · Support height 170 mm
- Size range
- Mounting width 80–500 · Stand depth 30–600 · Support height 80–1800 mm
- Manufacturing
- 170 × 90 × 170 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.048 m² · about 10 up on a 720 × 1020 mm sheet
- Default board
- Solid chipboard 1.2 mm · 1.2 mm caliper
- Board options
- E-flute KE-flute WF-fluteB-fluteChipboard 1.2Chipboard 2
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (1.2 mm for Solid chipboard 1.2 mm). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Mounting spine | 170 × 170 | – |
| Left triangular rear wing | 90 × 170 | W × – |
| Right triangular rear wing | 90 × 170 | W × – |
| Left locking arm 1 | 61.2 × 47.3 | – |
| Right locking arm 1 | 61.2 × 47.3 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 3 options; the template and 3D preview follow each change.
- Brace reachmm
- Brace height above base (0 = auto)mm
- Locking levelscount
The double-wing folding back support family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this landscape double-wing back support yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.