Preset
Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
Parametric structureDisplay
Double-wing folding back support dieline
A separate cardboard support with two triangular rear wings. Glue or tape the mounting spine to your display, open both wings and seat each integral locking arm in its matching slot. Choose two locking levels for four arms on a larger support. Folds flat for storage. A parametric template — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside90 × 72 × 180 mm
Outside90 × 72 × 180 mm
Flat blank234 × 180 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- —
- Inside size
- Mounting width 90 · Stand depth 72 · Support height 180 mm
- Size range
- Mounting width 80–500 · Stand depth 30–600 · Support height 80–1800 mm
- Manufacturing
- 90 × 72 × 180 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.032 m² · about 15 up on a 720 × 1020 mm sheet
- Default board
- E-flute kraft / kraft · 1.6 mm caliper
- Board options
- E-flute KE-flute WF-fluteB-fluteChipboard 1.2Chipboard 2
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (1.6 mm for E-flute kraft / kraft). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Mounting spine | 90 × 180 | L × H |
| Left triangular rear wing | 72 × 180 | W × H |
| Right triangular rear wing | 72 × 180 | W × H |
| Left locking arm 1 | 32.4 × 37.8 | – |
| Right locking arm 1 | 32.4 × 37.8 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 3 options; the template and 3D preview follow each change.
- Brace reachmm
- Brace height above base (0 = auto)mm
- Locking levelscount
Ready-sized double-wing folding back support presets
The same structure with sizes, boards and options set for a use.
- Preset
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this double-wing folding back support yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.