Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-FRAME-DECK-CARRIER-01Carriers
Six-hole enclosed frame carrier dieline
A rectangular carrying frame encloses a separate raised six-hole platform while leaving its front and back open. Two slotted carry flaps fold over the top or lift for carrying. Exports the frame and fitted platform as separate blanks. A ready-sized preset of the open-sided frame-and-deck carrier — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside270 × 180 × 160 mm
Outside273.2 × 180 × 169.6 mm
Flat blank901 × 396 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-FRAME-DECK-CARRIER-01
- Structure
- Open-sided frame-and-deck carrier
- Inside size
- Inside length 270 · Inside depth 180 · Inside height 160 mm
- Size range
- Inside length 100–600 · Inside depth 80–400 · Inside height 70–400 mm
- Manufacturing
- 273.2 × 180 × 164.8 mm score to score · inside vs outside sizes
- Parts
- 2 parts — Carrier frame and handles, Six-hole support platform
- Board area
- 0.259 m²
- Default board
- E-flute kraft / kraft · 1.6 mm caliper
- Board options
- E-flute KE-flute WF-fluteKraft 350FBB 400
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How it folds
The six-hole enclosed frame carrier erects in 3 steps, in the order the creases are scored to take. The editor plays the same sequence in 3D and lights each step’s creases on the dieline.
- 1Fold the walls upRight frame wall, Carrier floor, Left frame wall, Platform support apron and 1 more
- 2Fold the glue flap and glue the seamFrame seam
- 3Raise the handleSlotted fold-flat carry flap and 1 more
How the blank is sized
Score-to-score panel sizes of this DM-FRAME-DECK-CARRIER-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (1.6 mm for E-flute kraft / kraft). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Carrier roofCarrier frame and handles | 273.2 × 180 | L + 2T × W |
| Right frame wallCarrier frame and handles | 164.8 × 180 | – × W |
| Carrier floorCarrier frame and handles | 273.2 × 180 | L + 2T × W |
| Left frame wallCarrier frame and handles | 164.8 × 180 | – × W |
| Frame seamCarrier frame and handles | 25 × 180 | – × W |
| Slotted fold-flat carry flap ×2Carrier frame and handles | 150.3 × 108 | – |
| Six-hole product platformSix-hole support platform | 269 × 179 | – |
| Platform support apron ×2Six-hole support platform | 269 × 30 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 4 options; the template and 3D preview follow each change.
- Openings per rowcount
- Product aperture diametermm
- Platform heightmm
- Handle lift°
The open-sided frame-and-deck carrier family
The same structure with sizes, boards and options set for a use.
Before you choose this template
Size, materials, downloads and production checks.
Will the six-hole enclosed frame carrier dieline fit my product?
A rectangular carrying frame encloses a separate raised six-hole platform while leaving its front and back open. Two slotted carry flaps fold over the top or lift for carrying. Exports the frame and fitted platform as separate blanks. The default dimensions in inside-size mode are Inside length 270 mm, Inside depth 180 mm, Inside height 160 mm. Measure your product and any inserts or wrapping, then set the template size. Check a physical sample with your contents before ordering production.
Can I change the size and design?
Yes. The supported ranges are Inside length 100–600 mm, Inside depth 80–400 mm, Inside height 70–400 mm. At the default settings, the editor also exposes Openings per row, Product aperture diameter, Platform height, Handle lift. Add your own artwork and preview the result in 3D. The template geometry is rebuilt when its dimensions change.
Which materials can I choose?
The default is E-flute kraft / kraft (1.6 mm caliper). This structure allows E-flute kraft / kraft, E-flute white / kraft, F-flute micro corrugated, Kraft board 350 g, Folding boxboard 400 g. Select the stock before checking fit, and ask your converter to confirm the grade and caliper for the intended product.
Which files can I download?
The template page offers dimensioned PDF, Illustrator (.ai via script), layered SVG and DXF cutting and crease geometry. After adding artwork in the editor, you can export a print-ready PDF and review the bleed, safe areas and dieline layers with your printer.
Is this dieline free?
Browsing the previews is free, and you can customize the template after signing in with Google. Template and print-file downloads require a Pro or Business plan. The Free plan allows one eligible download every 8 hours; free mockups, renders and videos carry a watermark. See the pricing page for the current plans.
Can I send the download straight to production?
Use the file as a starting point for a printer or converter review. Confirm the finished dimensions, stock, crease and cutting setup, assembly, bleed and artwork, then approve a physical sample. The 3D preview does not test strength, transit performance or suitability for particular contents.
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this six-hole enclosed frame carrier yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.