Preset
Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
ECMA F60.32.00.00Carriers
Integral separator basket carrier dieline
A single blank with hinged cell separators, a reinforced centre handle and a glued folding floor. A parametric template — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside216 × 140 × 240 mm
Outside216.9 × 140.9 × 240 mm
Flat blank648.5 × 413.8 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- ECMA F60.32.00.00
- Inside size
- Length 216 · Width 140 · Overall height 240 mm
- Size range
- Length 100–600 · Width 60–350 · Overall height 120–500 mm
- Manufacturing
- 216.9 × 140.9 × 240 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.234 m² · about 1 up on a 720 × 1020 mm sheet
- Default board
- Kraft board 350 g · 0.46 mm caliper
- Board options
- Kraft 350FBB 400SBS 350SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this ECMA F60.32.00.00 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.46 mm for Kraft board 350 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| front basket wall | 127.2 × 216.9 | – × L + 2T |
| front handle | 44.8 × 144.6 | – |
| front handle reinforcement | 112.8 × 140.9 | – × W + 2T |
| front cell separator 1 | 44.8 × 70.5 | – |
| front cell separator 2 | 44.8 × 70.5 | – |
| front half end wall ×2 | 127.2 × 70.5 | – |
| Centre seam glue flap ×4 | 172 × 28 | – |
| back basket wall | 44.8 × 144.6 | – |
| back handle | 112.8 × 216.9 | – × L + 2T |
| back handle reinforcement | 112.8 × 140.9 | – × W + 2T |
| back cell separator 1 | 44.8 × 70.5 | – |
| back cell separator 2 | 44.8 × 70.5 | – |
| back half end wall ×2 | 127.2 × 70.5 | – |
| First floor half | 70.2 × 216.9 | – × L + 2T |
| Second floor half | 70.2 × 194.4 | – |
| Floor glue flap | 28 × 216.9 | – × L + 2T |
Adjustable in the editor
Beyond the size and board, this structure exposes 4 options; the template and 3D preview follow each change.
- Compartments2 options
- Basket wall heightmm
- Handhole widthmm
- Handhole heightmm
Ready-sized integral separator basket carrier presets
The same structure with sizes, boards and options set for a use.
- Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this integral separator basket carrier yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.