Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
Parametric structureFood
Caramel popcorn scoop — Fries scoop dieline
Editable 100 × 90 × 165 mm starting point using fries scoop. Adjust the dimensions to your product before prototyping. A ready-sized preset of the fries scoop — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside100 × 90 × 165 mm
Outside100.9 × 90.9 × 165.4 mm
Flat blank375.1 × 241.3 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- —
- Inside size
- Width 100 · Depth 90 · Height 165 mm
- Size range
- Width 50–180 · Depth 25–160 · Height 50–260 mm
- Manufacturing
- 100.5 × 90.5 × 165.2 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.060 m² · about 6 up on a 720 × 1020 mm sheet
- Default board
- Food SBS, PE-coated 300 g · 0.45 mm caliper
- Board options
- Food SBS PESBS 350Food kraft PEKraft 350SBS 300SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
Adjustable in the editor
Beyond the size and board, this structure exposes 5 options; the template and 3D preview follow each change.
- Top edge3 options
- Wall taper°
- Front/back taper°
- Scallop depthmm
- Bottom2 options
The fries scoop family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this caramel popcorn scoop — fries scoop yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.