Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-HANDLED-CARRY-WRAP-01Sleeves
Document wallet with handle dieline
A carry wrap or wallet from one blank: front and back walls rise into doubled handle extensions with matching hand holes that meet above the contents. Open ends or glued side gussets. A ready-sized preset of the handled carry wrap / document wallet — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside330 × 20 × 240 mm
Outside331 × 21 × 241 mm
Flat blank394 × 701.3 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-HANDLED-CARRY-WRAP-01
- Inside size
- Length 330 · Depth 20 · Height 240 mm
- Size range
- Length 60–600 · Depth 5–300 · Height 30–600 mm
- Manufacturing
- 330.5 × 20.5 × 240.5 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.246 m²
- Default board
- SBS white board 350 g · 0.5 mm caliper
- Board options
- Kraft 350SBS 350FBB 400GD2 350E-flute KSBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this DM-HANDLED-CARRY-WRAP-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.5 mm for SBS white board 350 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Base | 330 × 20 | L × W |
| Front | 330 × 240 | L × H |
| Back | 330 × 240 | L × H |
| Handle ×2 | 330 × 50.7 | L × – |
| Side gusset ×2 | 20 × 240 | W × H |
| Handle roll ×2 | 328 × 1.2 | – |
| Glue flap ×2 | 12 × 239 | – × H − 2T |
| Handle inner ply ×2 | 328 × 48.7 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 4 options; the template and 3D preview follow each change.
- Ends2 options
- Handle heightmm
- Hand hole widthmm
- Hand hole heightmm
The handled carry wrap / document wallet family
The same structure with sizes, boards and options set for a use.
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this document wallet with handle yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.