

The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
Mini hexagon drawer box dieline
A hexagonal sleeve lying on a flat side with a drawer that slides out of either end: the drawer has hexagonal end walls and five or three side walls, and the sleeve can carry thumb notches or the drawer a finger hole. A ready-sized preset of the hexagon drawer box — change the length, width and height and every panel, tuck and glue flap is redrawn to match.

Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-HEX-DRAWER-01
- Structure
- Hexagon drawer box
- Inside size
- Width 50 · Depth 60 · Height 43 mm
- Size range
- Width 40–250 · Depth 40–300 · Height 25–220 mm
- Manufacturing
- 50.5 × 60.5 × 43.5 mm score to score · inside vs outside sizes
- Parts
- 2 parts — Sleeve, Drawer
- Board area
- 0.022 m²
- Default board
- SBS white board 350 g · 0.5 mm caliper
- Board options
- SBS 350FBB 400Kraft 350Black 350SBS 400SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm

On a production sheet
Exact engine layout at the stated default dimensions: 50 × 60 × 43 mm. Stock 1020 × 720 mm, grain along width; 12 mm gripper, 10 mm tail, 6 mm sides, 5 mm gutter and 3 mm bleed. Grain rotation, automatic layout. Each part is nested separately.
Not proven optimal: upper bound 63 ups, within 13 ups (20.6 %).
How it folds
The mini hexagon drawer box erects in 3 steps, in the order the creases are scored to take. The editor plays the same sequence in 3D and lights each step’s creases on the dieline.
- 1Fold the walls upLower right side, Upper right side, Top, Upper left side, Lower left side and 5 more
- 2Fold the glue flap and glue the seamGlue flap and 7 more
- 3Fold the walls upFront end, Back end
How the blank is sized
Score-to-score panel sizes of this DM-HEX-DRAWER-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.5 mm for SBS white board 350 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| BottomSleeve | 27 × 60.5 | – × W + T |
| Lower right sideSleeve | 26.9 × 60.5 | – × W + T |
| Upper right sideSleeve | 26.9 × 60.5 | – × W + T |
| TopSleeve | 27 × 60.5 | – × W + T |
| Upper left sideSleeve | 26.9 × 60.5 | – × W + T |
| Lower left sideSleeve | 26.9 × 60.5 | – × W + T |
| Glue flapSleeve | 10.8 × 56.5 | – |
| BottomDrawer | 25.3 × 60.5 | – × W + T |
| Lower right sideDrawer | 25.2 × 60.5 | – × W + T |
| Lower left sideDrawer | 25.2 × 60.5 | – × W + T |
| Front endDrawer | 25.3 × 43.5 | – × H + T |
| Back endDrawer | 25.3 × 43.5 | – × H + T |
| Upper right sideDrawer | 25.2 × 60.5 | – × W + T |
| Glue flap ×8Drawer | 21.2 × 9.5 | – |
| Upper left sideDrawer | 25.2 × 60.5 | – × W + T |
Adjustable in the editor
Beyond the size and board, this structure exposes 2 options; the template and 3D preview follow each change.
- Drawer2 options
- Pull3 options
The hexagon drawer box family
The same structure with sizes, boards and options set for a use.

Preset
Preset
Preset
Before you choose this template
Size, materials, downloads and production checks.
Will the mini hexagon drawer box dieline fit my product?
A hexagonal sleeve lying on a flat side with a drawer that slides out of either end: the drawer has hexagonal end walls and five or three side walls, and the sleeve can carry thumb notches or the drawer a finger hole. The default dimensions in inside-size mode are Width 50 mm, Depth 60 mm, Height 43 mm. Measure your product and any inserts or wrapping, then set the template size. Check a physical sample with your contents before ordering production.
Can I change the size and design?
Yes. The supported ranges are Width 40–250 mm, Depth 40–300 mm, Height 25–220 mm. At the default settings, the editor also exposes Drawer, Pull. Add your own artwork and preview the result in 3D. The template geometry is rebuilt when its dimensions change.
Which materials can I choose?
The default is SBS white board 350 g (0.5 mm caliper). This structure allows SBS white board 350 g, Folding boxboard 400 g, Kraft board 350 g, Black-core board 350 g, SBS white board 400 g, SBS white board 18 pt. Select the stock before checking fit, and ask your converter to confirm the grade and caliper for the intended product.
Which files can I download?
The template page offers dimensioned PDF, Illustrator (.ai via script), layered SVG and DXF cutting and crease geometry. After adding artwork in the editor, you can export a print-ready PDF and review the bleed, safe areas and dieline layers with your printer.
Is this dieline free?
Browsing the previews is free, and you can customize the template after signing in with Google. Template and print-file downloads require a Pro or Business plan. The Free plan allows one eligible download every 8 hours; free mockups, renders and videos carry a watermark. See the pricing page for the current plans.
Can I send the download straight to production?
Use the file as a starting point for a printer or converter review. Confirm the finished dimensions, stock, crease and cutting setup, assembly, bleed and artwork, then approve a physical sample. The 3D preview does not test strength, transit performance or suitability for particular contents.
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this mini hexagon drawer box yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.





