Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-LABTUBE-01Labels
50 ml centrifuge tube dieline
A clear screw-cap tube: round, flat, conical (centrifuge) or skirted bottom, glass or plastic, optionally holding one or two pre-rolls. Print the front label. A ready-sized preset of the screw-cap tube (lab / centrifuge / pre-roll) — change its size and the cut outline, bleed and safe area are redrawn to match.
InsideØ 29 × 115 mm
OutsideØ 29 × 115 mm
Flat blank54.7 × 54.4 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-LABTUBE-01
- Inside size
- Tube diameter 29 · Overall height 115 mm
- Size range
- Tube diameter 8–40 · Overall height 40–200 mm
- Manufacturing
- Ø 29 × 115 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.003 m² · about 187 up on a 720 × 1020 mm sheet
- Default board
- Art paper 170 g · 0.16 mm caliper
- Board options
- Paper 170
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Cut
- Bleed 3 mm
Adjustable in the editor
Beyond the size and board, this structure exposes 6 options; the template and 3D preview follow each change.
- Bottom4 options
- Cap2 options
- Glass tubeon / off
- Print the cap topon / off
- Pre-rolls insidecount
- Cap colour6 options
The screw-cap tube (lab / centrifuge / pre-roll) family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this 50 ml centrifuge tube yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.