Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
Parametric structureFood
Crêpe holder dieline
Open-tipped cone that holds a folded crêpe or waffle. A ready-sized preset of the paper cone — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
InsideØ 120 × 150 mm
OutsideØ 120 × 150 mm
Flat blank325.7 × 189.8 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- —
- Inside size
- Opening Ø 120 · Height 150 mm
- Size range
- Opening Ø 30–250 · Height 40–400 mm
- Manufacturing
- Ø 120 × 150 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.038 m² · about 10 up on a 720 × 1020 mm sheet
- Default board
- Food kraft, PE-lined 320 g · 0.5 mm caliper
- Board options
- Food SBS PEFood kraft PESBS 300Kraft 350Paper 170SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.5 mm for Food kraft, PE-lined 320 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Left strip ×7 | 13.5 × 156.6 | – |
| Front strip ×6 | 13.5 × 156.6 | – |
| Front strip | 13.5 × 156.6 | π·Ø / 28 × Slant |
| Right strip ×7 | 13.5 × 156.6 | – |
| Back strip ×2 | 13.5 × 156.6 | – |
| Back strip ×5 | 156.6 × 13.5 | – |
| Glue overlap | 156.6 × 12 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 2 options; the template and 3D preview follow each change.
- Open tip Ømm
- Glue overlapmm
The paper cone family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this crêpe holder yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.