Skip to content
DielineMaker
Start designing free
Pocketfold invitation 5 × 7 in
Preview image

The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.

Parametric structureCards & tags

Pocketfold invitation 5 × 7 in dieline

A pocket-fold invitation folder for a 5 × 7 in card, with a cover that folds over the card and a glued pocket for RSVP and detail inserts. A ready-sized preset of the presentation folder — change the length, width and height and every panel, tuck and glue flap is redrawn to match.

Inside133 × 184 mm
Outside133 × 184 mm
Flat blank278 × 244 mm
Download the dielinePro
Flat dieline preview

Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans

Reference
—
Structure
Presentation folder
Inside size
Width 133 · Height 184 mm
Size range
Width 120–400 · Height 150–450 mm
Manufacturing
133 × 184 mm score to score · inside vs outside sizes
Parts
One blank
Board area
0.057 m²
Default board
SBS white board 300 g · 0.42 mm caliper
Board options
SBS 350FBB 400SBS 300Kraft 350Black 350GD2 350SBS 18 pt
Good for
pocketfold invitationpocketfold invitation templatepocket fold invitationpocket invitationwedding invitation folderinvitation pocketpresentation folderpocket folderfolderdocument folder

The flat dieline

Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline. Folder sizes, pockets and clearances.

  • Crease
  • Cut
  • Glue area
  • Bleed 3 mm
Pocketfold invitation 5 × 7 in flat dieline with cut and crease lines

On a production sheet

Exact engine layout at the stated default dimensions: 133 × 133 × 184 mm. Stock 1020 × 720 mm, grain along width; 12 mm gripper, 10 mm tail, 6 mm sides, 5 mm gutter and 3 mm bleed. Grain rotation, automatic layout. Each part is nested separately.

8 per sheet · Presentation folder
8 copies of Presentation folder on the stock sheet

Not proven optimal: upper bound 11 ups, within 3 ups (27.3 %).

Open in editor with this sheet

How it folds

The pocketfold invitation 5 × 7 in erects in 3 steps, in the order the creases are scored to take. The editor plays the same sequence in 3D and lights each step’s creases on the dieline.

  1. 1
    Fold the glue flap and glue the seamGlue tab
  2. 2
    Fold the flapsRight pocket
  3. 3
    Fold the walls upBack cover
FrontBack · 3Right pocket · 2
Each panel at its place on the blank, numbered by the step that folds it. Grey panels stay flat: the base, or the face the rest folds around.

How the blank is sized

Score-to-score panel sizes at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.42 mm for SBS white board 300 g). Change the size or board in the editor and every panel is recalculated.

PanelSize (mm)Formula
Front cover133 × 184W × H
Back cover133 × 184W × H
Right pocket128.7 × 60–
Glue tab12 × 60–

Adjustable in the editor

Beyond the size and board, this structure exposes 9 options; the template and 3D preview follow each change.

  • Pockets4 options
  • Pocket depthmm
  • Pocket capacity gussetmm
  • Pocket shape3 options
  • Capacity spinemm
  • Business card slitson / off
  • Cover lock4 options
  • Hanging tab3 options
  • Lock flap depthmm

The presentation folder family

The same structure with sizes, boards and options set for a use.

All 16 presentation folder templates

Before you choose this template

Size, materials, downloads and production checks.

Will the pocketfold invitation 5 × 7 in dieline fit my product?

A pocket-fold invitation folder for a 5 × 7 in card, with a cover that folds over the card and a glued pocket for RSVP and detail inserts. The default dimensions in inside-size mode are Width 133 mm, Height 184 mm. Measure your product and any inserts or wrapping, then set the template size. Check a physical sample with your contents before ordering production.

Can I change the size and design?

Yes. The supported ranges are Width 120–400 mm, Height 150–450 mm. At the default settings, the editor also exposes Pockets, Pocket depth, Pocket capacity gusset, Pocket shape, Capacity spine, Business card slits and 3 more options. Add your own artwork and preview the result in 3D. The template geometry is rebuilt when its dimensions change.

Which materials can I choose?

The default is SBS white board 300 g (0.42 mm caliper). This structure allows SBS white board 350 g, Folding boxboard 400 g, SBS white board 300 g, Kraft board 350 g, Black-core board 350 g, Grey-back duplex 350 g, SBS white board 18 pt. Select the stock before checking fit, and ask your converter to confirm the grade and caliper for the intended product.

Which files can I download?

The template page offers dimensioned PDF, Illustrator (.ai via script), layered SVG and DXF cutting and crease geometry. After adding artwork in the editor, you can export a print-ready PDF and review the bleed, safe areas and dieline layers with your printer.

Is this dieline free?

Browsing the previews is free, and you can customize the template after signing in with Google. Template and print-file downloads require a Pro or Business plan. The Free plan allows one eligible download every 8 hours; free mockups, renders and videos carry a watermark. See the pricing page for the current plans.

Can I send the download straight to production?

Use the file as a starting point for a printer or converter review. Confirm the finished dimensions, stock, crease and cutting setup, assembly, bleed and artwork, then approve a physical sample. The 3D preview does not test strength, transit performance or suitability for particular contents.

Compare plans and downloads

Similar structures

Other structures built in a similar way, matched on code family, category, closures and proportions.

All cards & tags templates

Make this pocketfold invitation 5 × 7 in yours

Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.