Preset
Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-RECSLEEVE-DIE-01Sleeves
Paper record inner sleeve (die) dieline
The flat production die for a paper record inner sleeve: front and back on a bottom fold, glued side flaps, thumb cut, optional round bottom, cut corners and centre hole. A parametric template — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside302 × 302 mm
Outside302 × 302 mm
Flat blank326 × 604 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-RECSLEEVE-DIE-01
- Inside size
- Sleeve width 302 · Sleeve height 302 mm
- Size range
- Sleeve width 100–340 · Sleeve height 100–340 mm
- Manufacturing
- 302 × 302 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.187 m² · about 2 up on a 720 × 1020 mm sheet
- Default board
- Art paper 170 g · 0.16 mm caliper
- Board options
- Paper 170SBS 300Kraft 350SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
Adjustable in the editor
Beyond the size and board, this structure exposes 4 options; the template and 3D preview follow each change.
- Bottom corners3 options
- Corner sizemm
- Centre hole diametermm
- Thumb cut radiusmm
Ready-sized paper record inner sleeve (die) presets
The same structure with sizes, boards and options set for a use.
- Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this paper record inner sleeve (die) yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.