Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-RIGID-MAGFILE-01Rigid
A4 magazine file dieline
A wrapped greyboard magazine file: board blank with a tall back, low front and sloping sides, plus its printed wrap with corner ears and turn-ins. A ready-sized preset of the rigid magazine file (board blank and wrap) — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside240 × 80 × 310 mm
Outside244 × 84 × 314 mm
Flat blank710.1 × 692.3 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-RIGID-MAGFILE-01
- Inside size
- Depth 240 · Spine width 80 · Back height 310 mm
- Size range
- Depth 120–400 · Spine width 40–200 · Back height 150–400 mm
- Manufacturing
- 242 × 82 × 312 mm score to score · inside vs outside sizes
- Parts
- 2 parts — Printed wrap, Greyboard blank
- Board area
- 0.336 m² · about 1 up on a 720 × 1020 mm sheet
- Default board
- Rigid greyboard 2 mm · 2 mm caliper
- Board options
- Rigid 2 mmRigid 1.5Chipboard 2
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this DM-RIGID-MAGFILE-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (2 mm for Rigid greyboard 2 mm). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| BasePrinted wrap | 84.3 × 244.3 | – |
| BackPrinted wrap | 84.3 × 310.2 | – |
| FrontPrinted wrap | 84.3 × 103.5 | – |
| Left sidePrinted wrap | 310.2 × 244.3 | – |
| Right sidePrinted wrap | 310.2 × 244.3 | – |
| Turn-in roll ×2Printed wrap | 80 × 2.2 | W × – |
| Glue flap ×2Printed wrap | 310.2 × 15 | – |
| Glue flap ×2Printed wrap | 103.5 × 15 | – |
| Turn-in roll ×2Printed wrap | 2.2 × 315.7 | – |
| Turn-in inner ply ×2Printed wrap | 80 × 15 | W × – |
| Turn-in inner ply ×2Printed wrap | 11.5 × 315.7 | – |
| BaseGreyboard blank | 84 × 244 | W + 2T × L + 2T |
| BackGreyboard blank | 84 × 310 | W + 2T × H |
| FrontGreyboard blank | 84 × 103.3 | W + 2T × – |
| Left sideGreyboard blank | 310 × 244 | H × L + 2T |
| Right sideGreyboard blank | 310 × 244 | H × L + 2T |
Adjustable in the editor
Beyond the size and board, this structure exposes 2 options; the template and 3D preview follow each change.
- Front heightmm
- Finger hole in the backon / off
The rigid magazine file (board blank and wrap) family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this a4 magazine file yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.