Preset
Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
Parametric structureRigid
Shoulder & neck box dieline
A three-piece rigid box: a neck glued inside the base takes the lid, which sits on the base’s edge so the closed box is flush. A parametric template — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside120 × 120 × 120 mm
Outside130 × 130 × 124.3 mm
Flat blank509.3 × 136.8 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- —
- Inside size
- Length 120 · Width 120 · Height 120 mm
- Size range
- Length 40–400 · Width 40–300 · Height 40–350 mm
- Manufacturing
- 125 × 125 × 122 mm score to score · inside vs outside sizes
- Parts
- 6 parts — Base wrap, Neck wrap, Lid wrap, Base board, Neck board, Lid board
- Board area
- 0.345 m² · about 6 up on a 720 × 1020 mm sheet
- Default board
- Rigid greyboard 2 mm · 2 mm caliper
- Board options
- Rigid 2 mmRigid 1.5
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Kiss cut
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (2 mm for Rigid greyboard 2 mm). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| BottomBase wrap | 130 × 130 | L + 2Tb + p × W + 2Tb + p |
| Front wallBase wrap | 130 × 74.3 | – × H + Tb + p |
| Front rimBase wrap | 130 × 2.3 | – |
| Front turn-inBase wrap | 125.3 × 15 | – |
| Corner ear ×4Base wrap | 15 × 71 | – |
| Back wallBase wrap | 130 × 74.3 | – × H + Tb + p |
| Back rimBase wrap | 130 × 2.3 | – |
| Back turn-inBase wrap | 125.3 × 15 | – |
| Left wallBase wrap | 74.3 × 130 | – × H + Tb + p |
| Left rimBase wrap | 2.3 × 130 | – |
| Left turn-inBase wrap | 15 × 125.3 | – |
| Right wallBase wrap | 74.3 × 130 | – × H + Tb + p |
| Right rimBase wrap | 2.3 × 130 | – |
| Right turn-inBase wrap | 15 × 125.3 | – |
| Neck leftNeck wrap | 124.3 × 119.5 | – |
| Neck frontNeck wrap | 124.3 × 119.5 | – |
37 more panels are listed in the editor’s structure step.
Adjustable in the editor
Beyond the size and board, this structure exposes 2 options; the template and 3D preview follow each change.
- Lid opening2 options
- Lid depthmm
Ready-sized shoulder & neck box presets
The same structure with sizes, boards and options set for a use.
- Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this shoulder & neck box yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.