Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
Parametric structureBags & pouches
Facial wipes with rigid lid dieline
A fin-seal film pack with a true dispensing aperture and a rigid hinged dispensing lid. Exports contain the film web and lid label; the moulded closure and weld dimensions need the closure supplier’s validation. A ready-sized preset of the rigid-lid wet-wipes pack — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside145 × 95 × 32 mm
Outside145 × 95 × 32 mm
Flat blank197 × 277 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- —
- Inside size
- Wipe-stack length 145 · Wipe-stack width 95 · Stack thickness 32 mm
- Size range
- Wipe-stack length 90–320 · Wipe-stack width 55–180 · Stack thickness 8–110 mm
- Manufacturing
- 145 × 95 × 32 mm score to score · inside vs outside sizes
- Parts
- 2 parts — Wipes pack film, Rigid closure label
- Board area
- 0.057 m² · about 9 up on a 720 × 1020 mm sheet
- Default board
- White PET / PE laminate · 0.09 mm caliper
- Board options
- White PET/PEMet PET/PE
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Cut
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.09 mm for White PET / PE laminate). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Fin seal (inner)Wipes pack film | 197 × 10 | – |
| Back (upper half)Wipes pack film | 197 × 47.5 | – |
| TopWipes pack film | 197 × 33.5 | – |
| FrontWipes pack film | 197 × 95 | – × W |
| BottomWipes pack film | 197 × 33.5 | – |
| Back (lower half)Wipes pack film | 197 × 47.5 | – |
| Fin seal (outer)Wipes pack film | 197 × 10 | – |
| Closure artworkRigid closure label | 62 × 32 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 5 options; the template and 3D preview follow each change.
- Long seal widthmm
- End sealsmm
- Opening lengthmm
- Opening widthmm
- Lid colour10 options
The rigid-lid wet-wipes pack family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this facial wipes with rigid lid yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.