Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
Parametric structureBags & pouches
Facial rigid-lid wet-wipes pack dieline
150 × 95 × 35 mm starting dimensions. Adjust to your actual container or product. A ready-sized preset of the rigid-lid wet-wipes pack — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside150 × 95 × 35 mm
Outside150 × 95 × 35 mm
Flat blank205 × 283 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- —
- Inside size
- Wipe-stack length 150 · Wipe-stack width 95 · Stack thickness 35 mm
- Size range
- Wipe-stack length 90–320 · Wipe-stack width 55–180 · Stack thickness 8–110 mm
- Manufacturing
- 150 × 95 × 35 mm score to score · inside vs outside sizes
- Parts
- 2 parts — Wipes pack film, Rigid closure label
- Board area
- 0.060 m² · about 9 up on a 720 × 1020 mm sheet
- Default board
- White PET / PE laminate · 0.09 mm caliper
- Board options
- White PET/PEMet PET/PE
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Cut
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.09 mm for White PET / PE laminate). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Fin seal (inner)Wipes pack film | 205 × 10 | – |
| Back (upper half)Wipes pack film | 205 × 47.5 | – |
| TopWipes pack film | 205 × 36.5 | – |
| FrontWipes pack film | 205 × 95 | – × W |
| BottomWipes pack film | 205 × 36.5 | – |
| Back (lower half)Wipes pack film | 205 × 47.5 | – |
| Fin seal (outer)Wipes pack film | 205 × 10 | – |
| Closure artworkRigid closure label | 74 × 34 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 5 options; the template and 3D preview follow each change.
- Long seal widthmm
- End sealsmm
- Opening lengthmm
- Opening widthmm
- Lid colour10 options
The rigid-lid wet-wipes pack family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this facial rigid-lid wet-wipes pack yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.