Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-TRAPEZOID-TIE-BOX-01Tuck end
Trapezoid ribbon gift box dieline
A broad trapezoid-section carton whose rounded end caps and top tabs are tied together through a hole at each end. A ready-sized preset of the trapezoid tie box with rounded end caps — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside160 × 90 × 50 mm
Outside160.9 × 90.9 × 50.9 mm
Flat blank310 × 268.6 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-TRAPEZOID-TIE-BOX-01
- Inside size
- Length 160 · Base width 90 · Height 50 mm
- Size range
- Length 60–400 · Base width 30–250 · Height 20–200 mm
- Manufacturing
- 160.5 × 90.5 × 50.5 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.055 m² · about 6 up on a 720 × 1020 mm sheet
- Default board
- Kraft board 350 g · 0.46 mm caliper
- Board options
- SBS 350FBB 400Kraft 350SBS 300Black 350SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this DM-TRAPEZOID-TIE-BOX-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.46 mm for Kraft board 350 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Base | 160 × 90 | L × W |
| Front slope | 160 × 53.9 | L × – |
| End panel ×2 | 50 × 90 | H × W |
| Top | 160 × 49.5 | L × – |
| Rounded end cap ×2 | 25 × 49.5 | – |
| Dust flap ×4 | 49.9 × 12 | – |
| Back slope | 160 × 53.9 | L × – |
| Top end tab ×2 | 25 × 49.5 | – |
| Glue flap | 156 × 12 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 3 options; the template and 3D preview follow each change.
- Top widthmm
- Cap heightmm
- Tie hole diametermm
The trapezoid tie box with rounded end caps family
The same structure with sizes, boards and options set for a use.
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this trapezoid ribbon gift box yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.