Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-TURTLE-HOLDER-01Display
Turtle pencil holder dieline
A cardboard turtle that holds pencils: two cross-slotted figure plates lock a base and an oval shell drilled with pencil holes. A ready-sized preset of the slotted board turtle pencil holder — change its size and the cut outline, bleed and safe area are redrawn to match.
Inside160 × 120 × 80 mm
Outside163.2 × 123.2 × 83.2 mm
Flat blank120.2 × 159.7 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-TURTLE-HOLDER-01
- Inside size
- Shell length 160 · Shell width 120 · Shell height 80 mm
- Size range
- Shell length 80–400 · Shell width 60–300 · Shell height 40–250 mm
- Manufacturing
- 161.6 × 121.6 × 81.6 mm score to score · inside vs outside sizes
- Parts
- 4 parts — Side profile (head and tail, slotted from the top), Cross profile (legs, slotted from the bottom), Shell with pencil holes, Base
- Board area
- 0.055 m² · about 32 up on a 720 × 1020 mm sheet
- Default board
- E-flute white / kraft · 1.6 mm caliper
- Board options
- E-flute WE-flute KB-fluteChipboard 2
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Cut
- Bleed 3 mm
Adjustable in the editor
Beyond the size and board, this structure exposes 2 options; the template and 3D preview follow each change.
- Pencil holes per quartercount
- Pencil hole diametermm
The slotted board turtle pencil holder family
The same structure with sizes, boards and options set for a use.
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this turtle pencil holder yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.