Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
Parametric structureCards & tags
7.5 in square spiral notebook dieline
190.5 × 190.5 mm cover with an editable 8 mm spine. Confirm bound thickness with your printer. A ready-sized preset of the spiral notebook — change its size and the cut outline, bleed and safe area are redrawn to match.
Inside190.5 × 8 × 190.5 mm
Outside190.5 × 8 × 190.5 mm
Flat blank190.5 × 190.5 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- —
- Inside size
- Cover width 190.5 · Page-block thickness 8 · Cover height 190.5 mm
- Size range
- Cover width 90–300 · Page-block thickness 4–20 · Cover height 120–360 mm
- Manufacturing
- 190.5 × 8 × 190.5 mm score to score · inside vs outside sizes
- Parts
- 3 parts — Front cover with punches, Back cover with punches, Page-block trim + punch reference
- Board area
- 0.108 m² · about 15 up on a 720 × 1020 mm sheet
- Default board
- SBS white board 350 g · 0.5 mm caliper
- Board options
- SBS 350SBS 300Kraft 350SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Cut
- Bleed 3 mm
Adjustable in the editor
Beyond the size and board, this structure exposes 7 options; the template and 3D preview follow each change.
- Punch pitchmm
- Punch diametermm
- Binding3 options
- Page shape2 options
- Concealed-coil coveron / off
- Index-tab dividerscount
- Tab projectionmm
The spiral notebook family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this 7.5 in square spiral notebook yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.