

The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
Easter bunny box dieline
A treat carton whose two tall ear flaps lock together at the top, for Easter eggs, sweets and party favours. A ready-sized preset of the twin-ear locking gift carton — change the length, width and height and every panel, tuck and glue flap is redrawn to match.

Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- —
- Structure
- Twin-ear locking gift carton
- Inside size
- Length 80 · Width 60 · Height 90 mm
- Size range
- Length 60–400 · Width 40–250 · Height 40–400 mm
- Manufacturing
- 80.5 × 60.5 × 90.5 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.052 m²
- Default board
- SBS white board 350 g · 0.5 mm caliper
- Board options
- SBS 350SBS 300FBB 400Kraft 350Black 350SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Reverse crease
- Crease
- Cut
- Glue area
- Bleed 3 mm

On a production sheet
Exact engine layout at the stated default dimensions: 80 × 60 × 90 mm. Stock 1020 × 720 mm, grain along width; 12 mm gripper, 10 mm tail, 6 mm sides, 5 mm gutter and 3 mm bleed. Grain rotation, automatic layout. Each part is nested separately.
Not proven optimal: upper bound 12 ups, within 3 ups (25.0 %).
How it folds
The easter bunny box erects in 6 steps, in the order the creases are scored to take. The editor plays the same sequence in 3D and lights each step’s creases on the dieline.
- 1Fold the walls upLeft side, Back, Right side, Glue flap
- 2Fold the flapsBottom side flap and 1 more
- 3Lock the tabsCrash-lock flap (back), Glued web, Crash-lock flap (front) and 1 more
- 4Raise the handleBack decorative ears, Front decorative ears, Top dust flap and 1 more
- 5Close the lidBack lid, Front lid
- 6Lock the tabsEar locking tongue
How the blank is sized
Score-to-score panel sizes at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.5 mm for SBS white board 350 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Front | 80.5 × 90.5 | L + T × H + T |
| Left side | 60.5 × 90.5 | W + T × H + T |
| Back | 80.5 × 90.5 | L + T × H + T |
| Right side | 60 × 90.5 | W × H + T |
| Glue flap | 12 × 90.5 | – × H + T |
| Crash-lock flap (back) | 80.5 × 37.3 | L + T × – |
| Glued web ×2 | 42.8 × 21 | – |
| Bottom side flap | 60.5 × 30 | W + T × – |
| Crash-lock flap (front) | 80.5 × 37.3 | L + T × – |
| Bottom side flap | 60 × 30 | W × – |
| Back lid | 80.5 × 29.8 | L + T × W/2 − T/2 |
| Front lid | 80.5 × 29.8 | L + T × W/2 − T/2 |
| Back decorative ears | 80.5 × 75 | L + T × – |
| Front decorative ears | 80.5 × 75 | L + T × – |
| Top dust flap | 60.5 × 28.2 | W + T × – |
| Top dust flap | 60 × 28.2 | W × – |
1 more panels are listed in the editor’s structure step.
Adjustable in the editor
Beyond the size and board, this structure exposes 6 options; the template and 3D preview follow each change.
- Handle closure2 options
- Retained window dividerson / off
- Bottom3 options
- Dust flap depthmm
- Ear heightmm
- Locking tongue reachmm
The twin-ear locking gift carton family
The same structure with sizes, boards and options set for a use.

Preset
Preset
Before you choose this template
Size, materials, downloads and production checks.
Will the easter bunny box dieline fit my product?
A treat carton whose two tall ear flaps lock together at the top, for Easter eggs, sweets and party favours. The default dimensions in inside-size mode are Length 80 mm, Width 60 mm, Height 90 mm. Measure your product and any inserts or wrapping, then set the template size. Check a physical sample with your contents before ordering production.
Can I change the size and design?
Yes. The supported ranges are Length 60–400 mm, Width 40–250 mm, Height 40–400 mm. At the default settings, the editor also exposes Handle closure, Retained window dividers, Bottom, Dust flap depth, Ear height, Locking tongue reach. Add your own artwork and preview the result in 3D. The template geometry is rebuilt when its dimensions change.
Which materials can I choose?
The default is SBS white board 350 g (0.5 mm caliper). This structure allows SBS white board 350 g, SBS white board 300 g, Folding boxboard 400 g, Kraft board 350 g, Black-core board 350 g, SBS white board 18 pt. Select the stock before checking fit, and ask your converter to confirm the grade and caliper for the intended product.
Which files can I download?
The template page offers dimensioned PDF, Illustrator (.ai via script), layered SVG and DXF cutting and crease geometry. After adding artwork in the editor, you can export a print-ready PDF and review the bleed, safe areas and dieline layers with your printer.
Is this dieline free?
Browsing the previews is free, and you can customize the template after signing in with Google. Template and print-file downloads require a Pro or Business plan. The Free plan allows one eligible download every 8 hours; free mockups, renders and videos carry a watermark. See the pricing page for the current plans.
Can I send the download straight to production?
Use the file as a starting point for a printer or converter review. Confirm the finished dimensions, stock, crease and cutting setup, assembly, bleed and artwork, then approve a physical sample. The 3D preview does not test strength, transit performance or suitability for particular contents.
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this easter bunny box yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.





