Preset
Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
Parametric structureCarriers
Bottle carrier dieline
A basket carrier for bottles or cans: fold-out partitions give each one its own cell and a glued two-ply centre handle carries the load. A parametric template — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside200 × 136 × 230 mm
Outside200.9 × 136.9 × 230 mm
Flat blank756.7 × 572.5 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- —
- Inside size
- Length 200 · Width 136 · Height 230 mm
- Size range
- Length 90–420 · Width 80–260 · Height 120–380 mm
- Manufacturing
- 200.5 × 136.5 × 230 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.226 m² · about 1 up on a 720 × 1020 mm sheet
- Default board
- Kraft board 350 g · 0.46 mm caliper
- Board options
- Kraft 350FBB 400SBS 350F-fluteE-flute KSBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Double crease
- Reverse crease
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.46 mm for Kraft board 350 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Base | 200.5 × 136.5 | L + T × W + T |
| Front | 200.5 × 103.5 | L + T × wall |
| Back | 200.5 × 103.5 | L + T × wall |
| Right end (front) | 68.7 × 103 | W/2 + 3T/2 × wall − T |
| Left end (front) | 67.8 × 103 | W/2 − T/2 × wall − T |
| Left end (back) | 67.8 × 103 | W/2 − T/2 × wall − T |
| Right end (back) | 67.8 × 103 | W/2 − T/2 × wall − T |
| End glue flap ×3 | 19.9 × 103 | – |
| Back handle ply | 200.5 × 103 | L + T × H − T |
| Front handle ply | 199.5 × 103 | L − 0.5 × H − T |
| Front liner | 198.5 × 102.5 | – |
| Cell partition ×4 | 65.8 × 87.2 | – |
| Back liner | 198.5 × 102.5 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 6 options; the template and 3D preview follow each change.
- Bottlescount
- Bottle diametermm
- Wall heightmm
- Cell partitionson / off
- Hand holeon / off
- Hole widthmm
Ready-sized bottle carrier presets
The same structure with sizes, boards and options set for a use.
- Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this bottle carrier yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.