Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
ECMA F50.02.00.00Display
Bottle tray with rounded side walls dieline
Glued tray whose curved-crease side walls cradle a wine bottle lying in it. A ready-sized preset of the bottle display tray — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside320 × 100 × 75 mm
Outside321 × 101 × 76 mm
Flat blank871 × 399.5 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- ECMA F50.02.00.00
- Inside size
- Length (A) 320 · Width (B) 100 · Depth 75 mm
- Size range
- Length (A) 100–450 · Width (B) 30–200 · Depth 25–150 mm
- Manufacturing
- 320.5 × 100.5 × 75.5 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.198 m²
- Default board
- SBS white board 350 g · 0.5 mm caliper
- Board options
- SBS 350FBB 400GD2 350Kraft 350E-flute WF-fluteSBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this ECMA F50.02.00.00 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.5 mm for SBS white board 350 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Base | 320.5 × 100.5 | L + T × W + T |
| Side wall ×2 | 320.5 × 75.5 | L + T × H + T |
| Rounded inner wall ×2 | 318.5 × 73.8 | – |
| Neck end wall | 75.5 × 100.5 | H + T × W + T |
| Foot end wall | 75.5 × 100.5 | H + T × W + T |
| Corner ear ×4 | 75.5 × 72 | H + T × – |
| Inner end wall ×2 | 74.5 × 95.5 | H − T × – |
| Floor liner ×2 | 75 × 24.3 | H × – |
| Chock riser ×2 | 25.1 × 95.5 | – |
| Chock cap ×2 | 25.1 × 95.5 | – |
| Diamond ear ×4 | 74.5 × 37.5 | H − T × – |
Adjustable in the editor
Beyond the size and board, this structure exposes 4 options; the template and 3D preview follow each change.
- Construction3 options
- End wedge dropmm
- Curved crease sagmm
- Cradle flap heightmm
The bottle display tray family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this bottle tray with rounded side walls yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.