Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
Parametric structureFood
Wings clamshell dieline
Large vented box for wings, tenders or fried chicken. A ready-sized preset of the burger clamshell — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside200 × 150 × 80 mm
Outside201 × 151 × 81 mm
Flat blank276.3 × 452.1 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- —
- Inside size
- Length 200 · Width 150 · Height 80 mm
- Size range
- Length 60–260 · Width 60–220 · Height 36–150 mm
- Manufacturing
- 200.5 × 150.5 × 80.5 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.111 m² · about 4 up on a 720 × 1020 mm sheet
- Default board
- Food kraft, PE-lined 320 g · 0.5 mm caliper
- Board options
- Food SBS PEFood kraft PESBS 350Kraft 350SBS 300F-fluteE-flute KE-flute WSBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.5 mm for Food kraft, PE-lined 320 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Base | 181.2 × 131.2 | – |
| Front | 181.2 × 47.5 | – |
| Back | 181.2 × 47.5 | – |
| Left side | 47.5 × 131.2 | – |
| Right side | 47.5 × 131.2 | – |
| Lid back | 201 × 35.3 | L + 2T × – |
| Lid top | 186.3 × 136.3 | – |
| Lid front | 186.3 × 35.3 | – |
| Lid left | 35.3 × 136.3 | – |
| Lid right | 35.3 × 136.3 | – |
| Glue ear ×4 | 22 × 45.6 | – |
| Glue ear ×4 | 22 × 33 | – |
| Lock flap | 48 × 13.9 | – |
| Lock tongue | 40 × 5 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 7 options; the template and 3D preview follow each change.
- Wall taper°
- Lid depthmm
- Closure3 options
- Tongue widthmm
- Slit depthmm
- Vents per sidecount
- Lid windowon / off
The burger clamshell family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this wings clamshell yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.