Skip to content
DielineMaker
Start designing free
Beers tray with tuck cover
Preview image

The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.

DM-COLLAPSIBLE-TRAY-TUCK-LID-01Trays & lids

Beers tray with tuck cover dieline

Four-corner Beers tray with end dust flaps and a hinged cover that tucks into the front. 8 × 5.5 × 2 in. A ready-sized preset of the collapsible glued-corner trays — change the length, width and height and every panel, tuck and glue flap is redrawn to match.

Inside203 × 140 × 51 mm
Outside205.5 × 141 × 51.5 mm
Flat blank339 × 415.5 mm
Download the dielinePro
Flat dieline preview

Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans

Reference
DM-COLLAPSIBLE-TRAY-TUCK-LID-01
Structure
Collapsible glued-corner trays
Inside size
Inside length 203 · Inside width 140 · Inside height 51 mm
Size range
Inside length 60–600 · Inside width 40–450 · Inside height 15–150 mm
Manufacturing
204.5 × 140.5 × 51.3 mm score to score · inside vs outside sizes
Parts
One blank
Board area
0.113 m²
Default board
SBS white board 350 g · 0.5 mm caliper
Board options
SBS 350SBS 300FBB 400Kraft 350E-flute WSBS 18 pt
Good for
beers traytuck covertop tuck closureships flatcollapsible trayglued trayin-fold trayout-fold trayfour corner gluedhinged lid tray

The flat dieline

Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.

  • Crease
  • Cut
  • Glue area
  • Bleed 3 mm
Beers tray with tuck cover flat dieline with cut and crease lines

On a production sheet

Exact engine layout at the stated default dimensions: 203 × 140 × 51 mm. Stock 1020 × 720 mm, grain along width; 12 mm gripper, 10 mm tail, 6 mm sides, 5 mm gutter and 3 mm bleed. Grain rotation, automatic layout. Each part is nested separately.

4 per sheet · Tray
4 copies of Tray on the stock sheet

Not proven optimal: upper bound 6 ups, within 2 ups (33.3 %).

Open in editor with this sheet

How it folds

The beers tray with tuck cover erects in 4 steps, in the order the creases are scored to take. The editor plays the same sequence in 3D and lights each step’s creases on the dieline.

  1. 1
    Fold the walls upLong wall and 1 more
  2. 2
    Fold the corner ears inEnd wall, Glued corner flap and 4 more
  3. 3
    Fold the dust flaps inEnd dust flap and 1 more
  4. 4
    Close the lidCover, Cover tuck
BottomBack · 1Right · 2Front · 1Left · 2Top · 4Cover tuck · 4
Each panel at its place on the blank, numbered by the step that folds it. Grey panels stay flat: the base, or the face the rest folds around.

How the blank is sized

Score-to-score panel sizes of this DM-COLLAPSIBLE-TRAY-TUCK-LID-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.5 mm for SBS white board 350 g). Change the size or board in the editor and every panel is recalculated.

PanelSize (mm)Formula
Tray floor204.5 × 140.5– × W + T
Long wall ×2204.5 × 51.3– × H + T/2
End wall ×251.3 × 140.5H + T/2 × W + T
Glued corner flap ×448.7 × 50.8– × H − T/2
End dust flap ×216 × 139.5– × W − T
Cover204.5 × 140.5– × W + T
Cover tuck202.5 × 32L − T × –

Adjustable in the editor

Beyond the size and board, this structure exposes 3 options; the template and 3D preview follow each change.

  • Construction4 options
  • End dust flap depthmm
  • Cover tuck depthmm

The collapsible glued-corner trays family

The same structure with sizes, boards and options set for a use.

Before you choose this template

Size, materials, downloads and production checks.

Will the beers tray with tuck cover dieline fit my product?

Four-corner Beers tray with end dust flaps and a hinged cover that tucks into the front. 8 × 5.5 × 2 in. The default dimensions in inside-size mode are Inside length 203 mm, Inside width 140 mm, Inside height 51 mm. Measure your product and any inserts or wrapping, then set the template size. Check a physical sample with your contents before ordering production.

Can I change the size and design?

Yes. The supported ranges are Inside length 60–600 mm, Inside width 40–450 mm, Inside height 15–150 mm. At the default settings, the editor also exposes Construction, End dust flap depth, Cover tuck depth. Add your own artwork and preview the result in 3D. The template geometry is rebuilt when its dimensions change.

Which materials can I choose?

The default is SBS white board 350 g (0.5 mm caliper). This structure allows SBS white board 350 g, SBS white board 300 g, Folding boxboard 400 g, Kraft board 350 g, E-flute white / kraft, SBS white board 18 pt. Select the stock before checking fit, and ask your converter to confirm the grade and caliper for the intended product.

Which files can I download?

The template page offers dimensioned PDF, Illustrator (.ai via script), layered SVG and DXF cutting and crease geometry. After adding artwork in the editor, you can export a print-ready PDF and review the bleed, safe areas and dieline layers with your printer.

Is this dieline free?

Browsing the previews is free, and you can customize the template after signing in with Google. Template and print-file downloads require a Pro or Business plan. The Free plan allows one eligible download every 8 hours; free mockups, renders and videos carry a watermark. See the pricing page for the current plans.

Can I send the download straight to production?

Use the file as a starting point for a printer or converter review. Confirm the finished dimensions, stock, crease and cutting setup, assembly, bleed and artwork, then approve a physical sample. The 3D preview does not test strength, transit performance or suitability for particular contents.

Compare plans and downloads

Similar structures

Other structures built in a similar way, matched on code family, category, closures and proportions.

All trays & lids templates

Make this beers tray with tuck cover yours

Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.