Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-DESK-FLAG-01Display
Large table flag 300 × 200 mm dieline
A small flag on a short metal stick with a ball finial, standing in a round weighted table base; one flag or two crossed flags. Each cloth prints edge to edge; the stand is presentation hardware. A ready-sized preset of the desk flag with table stand — change its size and the cut outline, bleed and safe area are redrawn to match.
Inside300 × 200 mm
Outside300 × 200 mm
Flat blank300 × 200 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-DESK-FLAG-01
- Inside size
- Flag width 300 · Flag height 200 mm
- Size range
- Flag width 80–400 · Flag height 50–300 mm
- Manufacturing
- 300 × 200 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.060 m² · about 9 up on a 720 × 1020 mm sheet
- Default board
- Art paper 170 g · 0.16 mm caliper
- Board options
- Paper 170
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Cut
- Bleed 3 mm
Adjustable in the editor
Beyond the size and board, this structure exposes 3 options; the template and 3D preview follow each change.
- Flagscount
- Flag shape2 options
- Stick heightmm
The desk flag with table stand family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this large table flag 300 × 200 mm yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.