Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-DESK-FLAG-01Display
Desk pennant dieline
A small flag on a short metal stick with a ball finial, standing in a round weighted table base; one flag or two crossed flags. Each cloth prints edge to edge; the stand is presentation hardware. A ready-sized preset of the desk flag with table stand — change its size and the cut outline, bleed and safe area are redrawn to match.
Inside200 × 100 mm
Outside200 × 100 mm
Flat blank200 × 100 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-DESK-FLAG-01
- Inside size
- Flag width 200 · Flag height 100 mm
- Size range
- Flag width 80–400 · Flag height 50–300 mm
- Manufacturing
- 200 × 100 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.010 m² · about 54 up on a 720 × 1020 mm sheet
- Default board
- Art paper 170 g · 0.16 mm caliper
- Board options
- Paper 170
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Cut
- Bleed 3 mm
Adjustable in the editor
Beyond the size and board, this structure exposes 3 options; the template and 3D preview follow each change.
- Flagscount
- Flag shape2 options
- Stick heightmm
The desk flag with table stand family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this desk pennant yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.