Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
ECMA F80.23.00.00Trays & lids
Diagonal divider insert 140×70×90 dieline
Two triangular compartments, e.g. for a pair of wedges or tapered tubes. A ready-sized preset of the diagonal compartment insert — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside140 × 70 × 90 mm
Outside141 × 71 × 90 mm
Flat blank646.2 × 90 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- ECMA F80.23.00.00
- Inside size
- Length 140 · Width 70 · Height 90 mm
- Size range
- Length 50–600 · Width 25–400 · Height 20–400 mm
- Manufacturing
- 140.5 × 70.5 × 90 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.058 m² · about 10 up on a 720 × 1020 mm sheet
- Default board
- SBS white board 350 g · 0.5 mm caliper
- Board options
- SBS 350Kraft 350FBB 400GD2 350F-fluteE-flute KE-flute WSBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this ECMA F80.23.00.00 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.5 mm for SBS white board 350 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Diagonal divider | 154.2 × 90 | – × H |
| End wall | 70 × 90 | W × H |
| Side wall | 140.5 × 90 | L + T × H |
| End wall | 70.5 × 90 | W + T × H |
| Side wall | 141 × 90 | L + 2T × H |
| End panel (glued over the end wall) | 70 × 90 | W × H |
Adjustable in the editor
Beyond the size and board, this structure exposes 1 option; the template and 3D preview follow each change.
- Compartments2 options
The diagonal compartment insert family
The same structure with sizes, boards and options set for a use.
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this diagonal divider insert 140×70×90 yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.