Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-ANGLED-STOP-SLEEVE-01Sleeves
Angled glued sleeve with stops dieline
Angled sleeve whose bottom carries an end-stop tab at each opening. A ready-sized preset of the angled glued sleeve — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside180 × 110 × 45 mm
Outside181 × 111 × 46 mm
Flat blank180 × 299.5 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-ANGLED-STOP-SLEEVE-01
- Inside size
- Length (A) 180 · Top width (B) 110 · Height 45 mm
- Size range
- Length (A) 40–500 · Top width (B) 40–300 · Height 20–200 mm
- Manufacturing
- 180.5 × 110.5 × 45.5 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.054 m² · about 9 up on a 720 × 1020 mm sheet
- Default board
- SBS white board 350 g · 0.5 mm caliper
- Board options
- SBS 350SBS 300FBB 400GD2 350Kraft 350PET 0.3SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this DM-ANGLED-STOP-SLEEVE-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.5 mm for SBS white board 350 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Top | 180 × 110.5 | L × W + T |
| Sloping side ×2 | 180 × 47.1 | L × – |
| Bottom | 180 × 82.9 | L × – |
| Glue flap | 180 × 12 | L × – |
| End stop ×2 | 21.6 × 29 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 4 options; the template and 3D preview follow each change.
- Construction3 options
- Bottom width (b)mm
- End stop widthmm
- End stop depthmm
The angled glued sleeve family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this angled glued sleeve with stops yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.