Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
ECMA D20.20.20.00Trays & lids
ECMA D20.20.20.00 · Trapezoid tray, glued corners dieline
Trapezoid tray, glued corners. A ready-sized preset of the non-rectangular and flared trays — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside220 × 160 × 50 mm
Outside220.5 × 160.7 × 50.3 mm
Flat blank315.6 × 261 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- ECMA D20.20.20.00
- Inside size
- Length (A) 220 · Width (B) 160 · Height 50 mm
- Size range
- Length (A) 60–600 · Width (B) 40–500 · Height 10–200 mm
- Manufacturing
- 220.5 × 160.5 × 50.3 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.064 m² · about 6 up on a 720 × 1020 mm sheet
- Default board
- SBS white board 350 g · 0.5 mm caliper
- Board options
- SBS 350SBS 300FBB 400Kraft 350E-flute WSBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this ECMA D20.20.20.00 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.5 mm for SBS white board 350 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Base | 220.5 × 160.5 | L + T × W + T |
| Back wall (B) | 220.5 × 50.3 | L + T × H + T/2 |
| Right side wall | 50.3 × 169.7 | H + T/2 × – |
| Front wall (b) | 110.5 × 50.3 | – × H + T/2 |
| Left side wall | 50.2 × 169.7 | H + T/2 × – |
| Glue tab ×4 | 30 × 50.3 | – × H + T/2 |
Adjustable in the editor
Beyond the size and board, this structure exposes 3 options; the template and 3D preview follow each change.
- Construction8 options
- Front width (b)mm
- Wall flare°
The non-rectangular and flared trays family
The same structure with sizes, boards and options set for a use.
Preset
Preset
PresetECMA D20.20.21.62 · Flared webbed tray with flange and cover plate
ECMA D20.20.21.62
Dieline files on Pro
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this ecma d20.20.20.00 · trapezoid tray, glued corners yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.