Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
FEFCO 0803Display
Rolled-edge display tray dieline
Sloped sides and the front rolled over into a white inner ply for strength and a clean edge. A ready-sized preset of the counter display tray — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside300 × 240 × 180 mm
Outside303.2 × 243.2 × 180 mm
Flat blank836.8 × 530.9 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- FEFCO 0803
- Inside size
- Width 300 · Depth 240 · Back height 180 mm
- Size range
- Width 120–1000 · Depth 100–800 · Back height 60–900 mm
- Manufacturing
- 301.6 × 241.6 × 180 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.272 m² · about 1 up on a 720 × 1020 mm sheet
- Default board
- E-flute white / kraft · 1.6 mm caliper
- Board options
- E-flute WB-fluteEB doubleE-flute K
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this FEFCO 0803 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (1.6 mm for E-flute white / kraft). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Base | 301.6 × 241.6 | L + T × W + T |
| Front | 301.6 × 54 | L + T × – |
| Back | 301.6 × 180 | L + T × H |
| Left side | 180 × 241.6 | H × W + T |
| Right side | 180 × 241.6 | H × W + T |
| Glue flap ×2 | 20 × 47.8 | – |
| Front roll | 301.6 × 3.4 | L + T × – |
| Glue flap ×2 | 20 × 173.8 | – |
| Left side roll | 3.4 × 272.5 | – |
| Right side roll | 3.4 × 272.5 | – |
| Front inner ply | 294.2 × 51.9 | – |
| Left side inner ply | 148 × 225.1 | – |
| Right side inner ply | 148 × 225.1 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 5 options; the template and 3D preview follow each change.
- Construction10 options
- Front heightmm
- Slope positionmm
- Shoulder radiusmm
- Doubled walls5 options
The counter display tray family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this rolled-edge display tray yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.