Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
FEFCO 0505Shipping
Width sleeve over length sleeve dieline
Source-specific sleeve and rigid-box constructions with separate printable blanks, specified opening directions and board allowances. A ready-sized preset of the crossed two-piece sleeves — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside400 × 260 × 150 mm
Outside410.6 × 267.4 × 160.6 mm
Flat blank400 × 851.4 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- FEFCO 0505
- Inside size
- Length 400 · Width 260 · Height 150 mm
- Size range
- Length 120–1000 · Width 80–700 · Height 40–500 mm
- Manufacturing
- 401.6 × 261.6 × 151.6 mm score to score · inside vs outside sizes
- Parts
- 2 parts — inner sleeve, outer sleeve
- Board area
- 0.651 m² · about 1 up on a 720 × 1020 mm sheet
- Default board
- E-flute kraft / kraft · 1.6 mm caliper
- Board options
- E-flute KE-flute WB-fluteSBS 350SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this FEFCO 0505 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (1.6 mm for E-flute kraft / kraft). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Bottominner sleeve | 400 × 261.6 | L × W + T |
| Frontinner sleeve | 400 × 151.6 | L × H + T |
| Backinner sleeve | 400 × 151.6 | L × H + T |
| Topinner sleeve | 400 × 261.6 | L × W + T |
| seam glueinner sleeve | 400 × 25 | L × – |
| Pose rigouter sleeve | 213.9 × 100 | – |
| Bottomouter sleeve | 481.3 × 100 | – |
| Rightouter sleeve | 267.4 × 159 | – |
| Leftouter sleeve | 267.4 × 159 | – |
| Topouter sleeve | 267.4 × 409 | – |
| seam glueouter sleeve | 267.4 × 25 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 3 options; the template and 3D preview follow each change.
- Construction3 options
- Glue or tuck depthmm
- Sleeve clearancemm
The crossed two-piece sleeves family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this width sleeve over length sleeve yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.