Preset
Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
FEFCO 0509Shipping
Slide box with inner wrap dieline
Source-specific sleeve and rigid-box constructions with separate printable blanks, specified opening directions and board allowances. A parametric template — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside400 × 260 × 150 mm
Outside407.4 × 270.6 × 160.6 mm
Flat blank407.4 × 881 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- FEFCO 0509
- Inside size
- Length 400 · Width 260 · Height 150 mm
- Size range
- Length 120–1000 · Width 80–700 · Height 40–500 mm
- Manufacturing
- 401.6 × 261.6 × 151.6 mm score to score · inside vs outside sizes
- Parts
- 2 parts — 0907 liner, outer sleeve
- Board area
- 0.648 m² · about 1 up on a 720 × 1020 mm sheet
- Default board
- E-flute kraft / kraft · 1.6 mm caliper
- Board options
- E-flute KE-flute WB-fluteSBS 350SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this FEFCO 0509 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (1.6 mm for E-flute kraft / kraft). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Bottom0907 liner | 261.6 × 401.6 | W + T × L + T |
| Right0907 liner | 261.6 × 151.6 | W + T × H + T |
| Left0907 liner | 261.6 × 151.6 | W + T × H + T |
| Top ×20907 liner | 261.6 × 200.8 | W + T × – |
| Pose rigouter sleeve | 325.9 × 100 | – |
| Bottomouter sleeve | 733.3 × 100 | – |
| Frontouter sleeve | 407.4 × 159 | – |
| Backouter sleeve | 407.4 × 159 | – |
| Topouter sleeve | 407.4 × 269 | – |
| seam glueouter sleeve | 407.4 × 25 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 3 options; the template and 3D preview follow each change.
- Construction4 options
- Glue or tuck depthmm
- Sleeve clearancemm
Ready-sized slide box with inner wrap presets
The same structure with sizes, boards and options set for a use.
- Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this slide box with inner wrap yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.