Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
FEFCO 0459Trays & lids
Octagonal glued tray dieline
Source-specific cut-corner constructions with glued corner faces or integral hinged covers and retaining flaps. A ready-sized preset of the glued cut-corner tray — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside320 × 240 × 55 mm
Outside326.4 × 243.2 × 57.4 mm
Flat blank436.4 × 353.2 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- FEFCO 0459
- Inside size
- Length 320 · Width 240 · Height 55 mm
- Size range
- Length 120–900 · Width 100–650 · Height 20–180 mm
- Manufacturing
- 324.8 × 241.6 × 55.8 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.139 m² · about 2 up on a 720 × 1020 mm sheet
- Default board
- E-flute kraft / kraft · 1.6 mm caliper
- Board options
- E-flute KE-flute WB-fluteSBS 350SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this FEFCO 0459 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (1.6 mm for E-flute kraft / kraft). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Eight-sided floor | 324.8 × 241.6 | – × W + T |
| n | 260.8 × 55.8 | – × H + T/2 |
| e | 55.8 × 177.6 | H + T/2 × – |
| s | 260.8 × 55.8 | – × H + T/2 |
| w | 55.8 × 177.6 | H + T/2 × – |
| e start corner | 55.8 × 45.3 | H + T/2 × – |
| e end corner | 55.8 × 45.3 | H + T/2 × – |
| w start corner | 55.8 × 45.3 | H + T/2 × – |
| w end corner | 55.8 × 45.3 | H + T/2 × – |
| n start glue | 32 × 55.8 | – × H + T/2 |
| n end glue | 32 × 55.8 | – × H + T/2 |
| s start glue | 32 × 55.8 | – × H + T/2 |
| s end glue | 32 × 55.8 | – × H + T/2 |
Adjustable in the editor
Beyond the size and board, this structure exposes 2 options; the template and 3D preview follow each change.
- Construction2 options
- Corner setbackmm
The glued cut-corner tray family
The same structure with sizes, boards and options set for a use.
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this octagonal glued tray yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.