Preset
Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
FEFCO 0441Trays & lids
Tray with hinged lid dieline
A glued corner-flap tray with its lid attached to the back wall; the lid’s skirts close down over the front and ends like a shoe-box lid that can’t get lost. A parametric template — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside330 × 210 × 120 mm
Outside342.8 × 214.8 × 122.4 mm
Flat blank574.8 × 714.4 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- FEFCO 0441
- Inside size
- Length 330 · Width 210 · Height 120 mm
- Size range
- Length 100–700 · Width 70–500 · Height 40–300 mm
- Manufacturing
- 334.8 × 211.6 × 121.6 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.363 m² · about 1 up on a 720 × 1020 mm sheet
- Default board
- E-flute kraft / kraft · 1.6 mm caliper
- Board options
- E-flute KE-flute WB-fluteF-flute
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this FEFCO 0441 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (1.6 mm for E-flute kraft / kraft). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Base | 334.8 × 211.6 | L + 3T × W + T |
| Front | 334.8 × 120 | L + 3T × H |
| Back | 334.8 × 121.6 | L + 3T × H + T |
| Left end | 120 × 211.6 | W + T × H |
| Right end | 120 × 211.6 | W + T × H |
| Corner flap ×4 | 104.2 × 118.4 | – × H − T |
| Lid | 334.8 × 213.2 | L + 7T × W + 2T |
| Lid front skirt | 341.2 × 48 | – |
| Lid side skirt ×2 | 48 × 213.2 | – × W + 2T |
| Lid corner flap ×2 | 48 × 46.4 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 1 option; the template and 3D preview follow each change.
- Lid skirt depthmm
Ready-sized tray with hinged lid presets
The same structure with sizes, boards and options set for a use.
- Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this tray with hinged lid yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.