Preset
Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
FEFCO 0826Display
Leaflet holder dieline
A holder for leaflets and brochures: a counter stand with a tall back, a front pocket and a strut, or a wall pocket box with a U cut-out front and hang slots. A parametric template — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside230 × 40 × 330 mm
Outside233.2 × 43.2 × 330 mm
Flat blank231.6 × 330 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- FEFCO 0826
- Inside size
- Width 230 · Depth 40 · Height 330 mm
- Size range
- Width 80–600 · Depth 15–200 · Height 120–1000 mm
- Manufacturing
- 231.6 × 41.6 × 330 mm score to score · inside vs outside sizes
- Parts
- 3 parts — Back, Pocket, Strut
- Board area
- 0.139 m² · about 8 up on a 720 × 1020 mm sheet
- Default board
- E-flute white / kraft · 1.6 mm caliper
- Board options
- E-flute WB-fluteE-flute KSBS 350SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this FEFCO 0826 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (1.6 mm for E-flute white / kraft). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| BackBack | 231.6 × 330 | L + T × H |
| Pocket basePocket | 231.6 × 41.6 | L + T × W + T |
| Pocket frontPocket | 231.6 × 99 | L + T × – |
| Pocket side ×2Pocket | 99 × 41.6 | – × W + T |
| Glue flap ×2Pocket | 92.8 × 20 | – |
| Glue flap ×2Pocket | 93.8 × 20 | – |
| Strut padStrut | 69 × 40 | – |
| StrutStrut | 69 × 206.3 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 4 options; the template and 3D preview follow each change.
- Construction2 options
- Pocket heightmm
- Corner radiusmm
- Strut depthmm
Ready-sized leaflet holder presets
The same structure with sizes, boards and options set for a use.
- Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this leaflet holder yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.