Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-MEETCOVER-01Shipping
Centre-joint meeting covers with dust flaps dieline
Meeting covers over a tray; only the walls carry dust flaps over the end walls, the covers stay plain. A ready-sized preset of the standard hinged and meeting-cover box — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside300 × 220 × 40 mm
Outside306.4 × 223.2 × 43.2 mm
Flat blank384.8 × 526.4 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-MEETCOVER-01
- Inside size
- Length 300 · Width 220 · Height 40 mm
- Size range
- Length 160–900 · Width 120–650 · Height 20–100 mm
- Manufacturing
- 304.8 × 221.6 × 41.6 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.184 m² · about 1 up on a 720 × 1020 mm sheet
- Default board
- E-flute kraft / kraft · 1.6 mm caliper
- Board options
- E-flute KE-flute WB-fluteSBS 350SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this DM-MEETCOVER-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (1.6 mm for E-flute kraft / kraft). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Floor | 304.8 × 221.6 | – × W + T |
| n wall | 304.8 × 41.6 | – × H + T |
| Meeting cover ×2 | 304.8 × 110.8 | – |
| s wall | 304.8 × 41.6 | – × H + T |
| End flap ×2 | 40 × 218.4 | H × W − T |
| End flap ×4 | 40 × 38.4 | H × H − T |
Adjustable in the editor
Beyond the size and board, this structure exposes 4 options; the template and 3D preview follow each change.
- Construction10 options
- Cover tuck depthmm
- Retaining flap depthmm
- Meeting-cover end flaps3 options
The standard hinged and meeting-cover box family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this centre-joint meeting covers with dust flaps yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.