Preset
Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
FEFCO 0446Trays & lids
Product tray with perforated shelves dieline
A corner-shouldered tray with two removable perforated product shelves and retained floor supports. A parametric template — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside400 × 300 × 80 mm
Outside403.2 × 306.4 × 81.6 mm
Flat blank497.6 × 466.4 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- FEFCO 0446
- Inside size
- Length 400 · Width 300 · Height 80 mm
- Size range
- Length 120–800 · Width 80–600 · Height 25–250 mm
- Manufacturing
- 401.6 × 304.8 × 80.8 mm score to score · inside vs outside sizes
- Parts
- 3 parts — Product holder tray, Product shelf A, Product shelf B
- Board area
- 0.321 m² · about 2 up on a 720 × 1020 mm sheet
- Default board
- E-flute kraft / kraft · 1.6 mm caliper
- Board options
- E-flute KE-flute WB-fluteF-fluteFBB 400
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Perforation
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this FEFCO 0446 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (1.6 mm for E-flute kraft / kraft). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| First floor halfProduct holder tray | 401.6 × 150.8 | L + T × – |
| Central floor fold stripProduct holder tray | 401.6 × 3.2 | L + T × – |
| Second floor halfProduct holder tray | 401.6 × 150.8 | L + T × – |
| Side wall with raised corner shoulders ×2Product holder tray | 401.6 × 80.8 | L + T × H + T/2 |
| Corner glue flap ×4Product holder tray | 48 × 79.2 | – × H − T/2 |
| Low end-wall half ×4Product holder tray | 48 × 150.8 | – |
| Struck shelf support and locking tongue ×4Product holder tray | 53.2 × 24 | – |
| Perforated central end-wall tie ×2Product holder tray | 48 × 3.2 | – |
| Perforated product shelfProduct shelf A | 398.4 × 147.6 | L − T × – |
| Retained aperture flap ×3Product shelf A | 51.3 × 25.4 | – |
| Raised shelf corner tab ×2Product shelf A | 31.2 × 58.7 | – |
| Perforated product shelfProduct shelf B | 398.4 × 147.6 | L − T × – |
| Retained aperture flap ×3Product shelf B | 51.3 × 25.4 | – |
| Raised shelf corner tab ×2Product shelf B | 31.2 × 58.7 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 3 options; the template and 3D preview follow each change.
- Product rowscount
- Product hole diametermm
- Shelf heightmm
Ready-sized product tray with perforated shelves presets
The same structure with sizes, boards and options set for a use.
- Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this product tray with perforated shelves yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.