Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
Parametric structureBags & pouches
Lap-seal snack wrapper dieline
One film wrapped round the product with a fin or lap seal, an adjustable back seam and crimped ends. Film width includes two seal widths for a fin or one overlap for a lap; confirm the sealing surfaces and cut-off with the converter. A ready-sized preset of the flow wrap — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside125 × 60 × 18 mm
Outside125 × 60 × 18 mm
Flat blank164.5 × 169 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- —
- Inside size
- Product length 125 · Product width 60 · Product height 18 mm
- Size range
- Product length 30–400 · Product width 8–250 · Product height 3–150 mm
- Manufacturing
- 125 × 60 × 18 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.028 m² · about 20 up on a 720 × 1020 mm sheet
- Default board
- Metallised PET / PE laminate · 0.09 mm caliper
- Board options
- Met PET/PEWhite PET/PEClear PET/PEKraft/PE
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.09 mm for Metallised PET / PE laminate). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Back (upper half) | 163 × 42 | – |
| Top | 163 × 19.5 | – |
| Front | 164.5 × 60 | – × W |
| Bottom | 163 × 19.5 | – |
| Back (lower half) | 163 × 18 | – |
| Lap seal overlap | 163 × 10 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 6 options; the template and 3D preview follow each change.
- Longitudinal seal2 options
- Long seal widthmm
- End sealsmm
- Product shape2 options
- Orientation2 options
- End cut2 options
The flow wrap family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this lap-seal snack wrapper yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.