Preset
Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
Parametric structureDisplay
Cardboard folding back support dieline
A separate cardboard rear support for signs, posters and standees. Glue or tape the mounting spine to the back of your display, fold out the triangular leg and seat the locking brace in its slot. Folds flat for storage. A parametric template — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside45 × 72 × 180 mm
Outside45 × 72 × 180 mm
Flat blank117 × 180 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- —
- Inside size
- Mounting width 45 · Stand depth 72 · Support height 180 mm
- Size range
- Mounting width 40–300 · Stand depth 30–600 · Support height 80–1800 mm
- Manufacturing
- 45 × 72 × 180 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.016 m² · about 35 up on a 720 × 1020 mm sheet
- Default board
- E-flute kraft / kraft · 1.6 mm caliper
- Board options
- E-flute KE-flute WF-fluteFBB 400Kraft 350B-fluteChipboard 1.2Chipboard 2
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (1.6 mm for E-flute kraft / kraft). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Mounting spine | 45 × 180 | L × H |
| Triangular rear leg | 72 × 180 | W × H |
| Locking brace | 25 × 37.8 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 3 options; the template and 3D preview follow each change.
- Brace reachmm
- Brace from basemm
- Display lean°
Ready-sized cardboard folding back support presets
The same structure with sizes, boards and options set for a use.
- Preset
Preset
Preset
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this cardboard folding back support yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.