Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
Parametric structureDisplay
Floor standee back support dieline
A 1 metre single-wing starting die. Compare the reinforced double-wing support for wide graphics and test the complete floor display before production. A ready-sized preset of the cardboard folding back support — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside150 × 350 × 1000 mm
Outside150 × 350 × 1000 mm
Flat blank500 × 1000 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- —
- Inside size
- Mounting width 150 · Stand depth 350 · Support height 1000 mm
- Size range
- Mounting width 40–300 · Stand depth 30–600 · Support height 80–1800 mm
- Manufacturing
- 150 × 350 × 1000 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.363 m² · about 1 up on a 720 × 1020 mm sheet
- Default board
- B-flute shipping · 3.2 mm caliper
- Board options
- E-flute KE-flute WF-fluteFBB 400Kraft 350B-fluteChipboard 1.2Chipboard 2
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (3.2 mm for B-flute shipping). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Mounting spine | 150 × 1000 | L × H |
| Triangular rear leg | 350 × 1000 | W × H |
| Locking brace | 97.5 × 159 | – |
Adjustable in the editor
Beyond the size and board, this structure exposes 3 options; the template and 3D preview follow each change.
- Brace reachmm
- Brace from basemm
- Display lean°
The cardboard folding back support family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this floor standee back support yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.