Preset
Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
Parametric structureCarriers
Can fridge pack dieline
The enclosed 12-can carton that lies flat in the fridge: cans sit on their sides two rows high, the ends are glued shut, and a perforated dispenser at one end tears away to serve one can at a time. A parametric template — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside398 × 123 × 133 mm
Outside399 × 124 × 134 mm
Flat blank525.5 × 644.5 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- —
- Inside size
- Length 398 · Width 123 · Height 133 mm
- Size range
- Length 150–500 · Width 60–200 · Height 50–200 mm
- Manufacturing
- 398.5 × 123.5 × 133.5 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.290 m² · about 1 up on a 720 × 1020 mm sheet
- Default board
- SBS white board 350 g · 0.5 mm caliper
- Board options
- SBS 350GD2 350Kraft 350FBB 400F-fluteSBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Perforation
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.5 mm for SBS white board 350 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Front | 133.5 × 398.5 | H + T × L + T |
| Top | 123.5 × 398.5 | W + T × L + T |
| Back | 133.5 × 398.5 | H + T × L + T |
| Bottom | 123 × 398.5 | W × L + T |
| Glue flap | 12 × 398.5 | – × L + T |
| Dust flap ×2 | 123.5 × 33 | W + T × – |
| Dust flap ×2 | 123 × 33 | W × – |
| Inner seal flap ×2 | 133.5 × 122.5 | H + T × W − T |
| Dispenser end | 133.5 × 123 | H + T × W |
| End | 133.5 × 123 | H + T × W |
Adjustable in the editor
Beyond the size and board, this structure exposes 5 options; the template and 3D preview follow each change.
- Dispenseron / off
- Dispenser reachmm
- Retaining lipmm
- Outer flap extramm
- Dust flap depthmm
Ready-sized can fridge pack presets
The same structure with sizes, boards and options set for a use.
- Preset
Preset
Preset
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this can fridge pack yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.