Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
Parametric structureCarriers
6-pack can carton (12 oz) dieline
Six 12 fl oz cans, 3 × 2, fully enclosed. A ready-sized preset of the can fridge pack — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside200 × 123 × 133 mm
Outside200.9 × 123.9 × 133.9 mm
Flat blank525.4 × 446.5 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- —
- Inside size
- Length 200 · Width 123 · Height 133 mm
- Size range
- Length 150–500 · Width 60–200 · Height 50–200 mm
- Manufacturing
- 200.5 × 123.5 × 133.5 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.186 m² · about 1 up on a 720 × 1020 mm sheet
- Default board
- Kraft board 350 g · 0.46 mm caliper
- Board options
- SBS 350GD2 350Kraft 350FBB 400F-fluteSBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Perforation
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.46 mm for Kraft board 350 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Front | 133.5 × 200.5 | H + T × L + T |
| Top | 123.5 × 200.5 | W + T × L + T |
| Back | 133.5 × 200.5 | H + T × L + T |
| Bottom | 123 × 200.5 | W × L + T |
| Glue flap | 12 × 200.5 | – × L + T |
| Dust flap ×2 | 123.5 × 33 | W + T × – |
| Dust flap ×2 | 123 × 33 | W × – |
| Inner seal flap ×2 | 133.5 × 122.5 | H + T × W − T |
| Dispenser end | 133.5 × 123 | H + T × W |
| End | 133.5 × 123 | H + T × W |
Adjustable in the editor
Beyond the size and board, this structure exposes 5 options; the template and 3D preview follow each change.
- Dispenseron / off
- Dispenser reachmm
- Retaining lipmm
- Outer flap extramm
- Dust flap depthmm
The can fridge pack family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this 6-pack can carton (12 oz) yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.