Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
Parametric structureCarriers
12 × 330 ml sleek can pack dieline
Twelve tall 58 mm sleek cans for seltzer, iced tea and energy drinks. A ready-sized preset of the can fridge pack — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside349 × 147 × 117 mm
Outside350 × 148 × 118 mm
Flat blank541.5 × 643.5 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- —
- Inside size
- Length 349 · Width 147 · Height 117 mm
- Size range
- Length 150–500 · Width 60–200 · Height 50–200 mm
- Manufacturing
- 349.5 × 147.5 × 117.5 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.274 m² · about 1 up on a 720 × 1020 mm sheet
- Default board
- SBS white board 350 g · 0.5 mm caliper
- Board options
- SBS 350GD2 350Kraft 350FBB 400F-fluteSBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Perforation
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.5 mm for SBS white board 350 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Front | 117.5 × 349.5 | H + T × L + T |
| Top | 147.5 × 349.5 | W + T × L + T |
| Back | 117.5 × 349.5 | H + T × L + T |
| Bottom | 147 × 349.5 | W × L + T |
| Glue flap | 12 × 349.5 | – × L + T |
| Dust flap ×2 | 147.5 × 28.5 | W + T × – |
| Dust flap ×2 | 147 × 28.5 | W × – |
| Inner seal flap ×2 | 117.5 × 146.5 | H + T × W − T |
| Dispenser end | 117.5 × 147 | H + T × W |
| End | 117.5 × 147 | H + T × W |
Adjustable in the editor
Beyond the size and board, this structure exposes 5 options; the template and 3D preview follow each change.
- Dispenseron / off
- Dispenser reachmm
- Retaining lipmm
- Outer flap extramm
- Dust flap depthmm
The can fridge pack family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Preset
Preset
Preset
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this 12 × 330 ml sleek can pack yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.