Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-GABLE-WINDOWS-01Food
Opposed-window gable gift box dieline
Large open display apertures on the front and back of a handled gable carton, with a manual snap-lock bottom. Uses the standard native gable handle; confirm closure and carrying load with your converter. A ready-sized preset of the gable box — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside180 × 90 × 110 mm
Outside181 × 91 × 111 mm
Flat blank553.5 × 291.4 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-GABLE-WINDOWS-01
- Structure
- Gable box
- Inside size
- Length 180 · Width 90 · Height 110 mm
- Size range
- Length 50–400 · Width 30–250 · Height 30–400 mm
- Manufacturing
- 180.5 × 90.5 × 110.5 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.141 m² · about 2 up on a 720 × 1020 mm sheet
- Default board
- SBS white board 350 g · 0.5 mm caliper
- Board options
- SBS 350Kraft 350FBB 400SBS 300GD2 350F-fluteSBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Reverse crease
- Crease
- Cut
- Glue area
- Bleed 3 mm
How it folds
The opposed-window gable gift box erects in 6 steps, in the order the creases are scored to take. The editor plays the same sequence in 3D and lights each step’s creases on the dieline.
- 1Fold the walls upLeft side, Back, Right side, Glue flap
- 2Fold the flapsSnap end and 1 more
- 3Lock the tabsSnap bottom
- 4Lock the tabsSnap tuck
- 5Fold the gussetsFront roof, Back roof, Left gable end, Right gable end, Gable fold-in and 6 more
- 6Raise the handleFront handle, Back handle
How the blank is sized
Score-to-score panel sizes of this DM-GABLE-WINDOWS-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.5 mm for SBS white board 350 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Front | 180.5 × 110.5 | L + T × H + T |
| Left side | 90.5 × 110.5 | W + T × H + T |
| Back | 180.5 × 110.5 | L + T × H + T |
| Right side | 90 × 110.5 | W × H + T |
| Glue flap | 12 × 110.5 | – × H + T |
| Snap end | 90.5 × 30 | W + T × – |
| Snap end | 90 × 30 | W × – |
| Snap bottom | 180.5 × 58.5 | L + T × – |
| Snap tuck | 180.5 × 58 | L + T × – |
| Front roof | 180.5 × 70.5 | L + T × √(rise² + (W/2)²) |
| Back roof | 180.5 × 70.5 | L + T × √(rise² + (W/2)²) |
| Front handle | 180.5 × 52 | L + T × – |
| Back handle | 180.5 × 52 | L + T × – |
| Left gable end | 90.5 × 70.5 | W + T × – |
| Right gable end | 90 × 70.5 | W × – |
| Gable fold-in ×2 | 45.3 × 70.5 | – |
2 more panels are listed in the editor’s structure step.
Adjustable in the editor
Beyond the size and board, this structure exposes 12 options; the template and 3D preview follow each change.
- Roof heightmm
- Bottom3 options
- Handle holeon / off
- Handle heightmm
- Hole widthmm
- Body windows3 options
- Window layout2 options
- Window filmon / off
- Body window width%
- Body window height%
- Cord holeson / off
- Ridge-slot tie roofon / off
The gable box family
The same structure with sizes, boards and options set for a use.
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Inspired by customer briefs
See where an idea can go.
Original concepts with fictional brands, paired with native templates you can open and customize.
BUTTER & FOLD
Make a wish. Make it a celebration.
The request
- Find a template for a celebration box from a reference photo.
Choose your starting point
A handled carton is a starting option. Compare the opening, base and side panels, then enter measured dimensions and board thickness before choosing a structure.
Explore the actual templates
Native geometry in sample colours below. Open a template to edit its sample artwork. The generated scene is creative direction; its artwork and construction may differ.
Before you choose this template
Size, materials, downloads and production checks.
Will the opposed-window gable gift box dieline fit my product?
Large open display apertures on the front and back of a handled gable carton, with a manual snap-lock bottom. Uses the standard native gable handle; confirm closure and carrying load with your converter. The default dimensions in inside-size mode are Length 180 mm, Width 90 mm, Height 110 mm. Measure your product and any inserts or wrapping, then set the template size. Check a physical sample with your contents before ordering production.
Can I change the size and design?
Yes. The supported ranges are Length 50–400 mm, Width 30–250 mm, Height 30–400 mm. At the default settings, the editor also exposes Roof height, Bottom, Handle hole, Handle height, Hole width, Body windows and 6 more options. Add your own artwork and preview the result in 3D. The template geometry is rebuilt when its dimensions change.
Which materials can I choose?
The default is SBS white board 350 g (0.5 mm caliper). This structure allows SBS white board 350 g, Kraft board 350 g, Folding boxboard 400 g, SBS white board 300 g, Grey-back duplex 350 g, F-flute micro corrugated, SBS white board 18 pt. Select the stock before checking fit, and ask your converter to confirm the grade and caliper for the intended product.
Which files can I download?
The template page offers dimensioned PDF, Illustrator (.ai via script), layered SVG and DXF cutting and crease geometry. After adding artwork in the editor, you can export a print-ready PDF and review the bleed, safe areas and dieline layers with your printer.
Is this dieline free?
Browsing the previews is free, and you can customize the template after signing in with Google. Template and print-file downloads require a Pro or Business plan. The Free plan allows one eligible download every 8 hours; free mockups, renders and videos carry a watermark. See the pricing page for the current plans.
Can I send the download straight to production?
Use the file as a starting point for a printer or converter review. Confirm the finished dimensions, stock, crease and cutting setup, assembly, bleed and artwork, then approve a physical sample. The 3D preview does not test strength, transit performance or suitability for particular contents.
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this opposed-window gable gift box yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.