Preview image
The real blank at this size, folded by the same engine as the studio. The artwork is a sample from a fictional brand — swap in your own in the editor.
DM-HANGING-HEADER-TRAY-01Display
Peg-hanging display tray dieline
An open tray whose back rises into a doubled Euro-slot header for peg hanging. A ready-sized preset of the hanging display tray with header — change the length, width and height and every panel, tuck and glue flap is redrawn to match.
Inside120 × 40 × 150 mm
Outside121 × 41 × 151 mm
Flat blank420 × 306 mm
Download the dielinePro
Sign in to download. Dieline downloads are part of Pro: PDF, Illustrator, SVG and DXF, cut, crease and bleed on separate layers, without a watermark. See plans
- Reference
- DM-HANGING-HEADER-TRAY-01
- Inside size
- Width 120 · Depth 40 · Tray height 150 mm
- Size range
- Width 50–300 · Depth 15–150 · Tray height 30–300 mm
- Manufacturing
- 120.5 × 40.5 × 150.5 mm score to score · inside vs outside sizes
- Parts
- One blank
- Board area
- 0.048 m² · about 6 up on a 720 × 1020 mm sheet
- Default board
- SBS white board 350 g · 0.5 mm caliper
- Board options
- SBS 350FBB 400Kraft 350Black 350SBS 18 pt
- Good for
The flat dieline
Exactly what the downloads contain, drawn from the template at its default size, with a 3 mm bleed. How to read a dieline.
- Crease
- Cut
- Glue area
- Bleed 3 mm
How the blank is sized
Score-to-score panel sizes of this DM-HANGING-HEADER-TRAY-01 blank at the default size, with the formula each one follows. L, W and H are the inside dimensions; T is the board caliper (0.5 mm for SBS white board 350 g). Change the size or board in the editor and every panel is recalculated.
| Panel | Size (mm) | Formula |
|---|---|---|
| Base | 120 × 40 | L × W |
| Back with header | 120 × 190 | L × – |
| Front lip | 120 × 37.5 | L × – |
| Side wall ×2 | 150 × 40 | H × W |
| Header roll | 120 × 0.5 | L × – |
| Glue flap ×2 | 146 × 10 | – |
| Glue flap ×2 | 33.5 × 10 | – |
| Header inner ply | 120 × 38 | L × – |
Adjustable in the editor
Beyond the size and board, this structure exposes 1 option; the template and 3D preview follow each change.
- Header heightmm
The hanging display tray with header family
The same structure with sizes, boards and options set for a use.
Similar structures
Other structures built in a similar way, matched on code family, category, closures and proportions.
Make this peg-hanging display tray yours
Open it in the editor to set your size, drop artwork on each face, check bleed and safe areas, and export print-ready PDF with the dieline on its own layer — or stage it in a 3D scene for a mockup.